O.K. here I am again. I am about to send my #110-8 baskets off to OCS and am in a quandary for what to choose. All three of these cones are available, I didn't know they had the 2121's available until today I am not interested in making them into exact JBL replicas, I am interested in the quality of the reproduction so..........which one should I have them do
So, you're talking about aftermarket kits?Originally Posted by quindecima
"Audio is filled with dangerous amateurs." --- Tim de Paravicini
OCS has JBL kits listed for all three, surprisingly enough
http://www.speakerrepair.com/page/RECNEPRC.html
As to which one, are we sure the E110 can be rebuilt as all of those? I think I recall that the 2123 is a go, not sure of the others. And I suppose it'd be handy to know what the finished drivers were going to be used for in the end.
All of those kits will go in the E110.
Barry.
If we knew what the hell we were doing, we wouldn't call it research would we.
They are going into my 4345 build
2122 then... unless you are willing to futz with the crossover AND -really- don't
want to refoam 10 years down the road. I'd suggest going as stock ask possible
other than where the designer has indicated his thoughts on upgrades.
O.K. I'll send my baskets in for the 2122's them. I have a pair of 2123H's I don't know what I will do with them but I'll store them away for something future.
Well then you could try both, if you eventually wanted to.
2122 should be an easy resell if done properly.
The stock crossover should work fine (perhaps CC'd).
Did you find Timbers' recommendations re 4345s?
Yes, I did a search and found the timbers dialog, good stuff! I have the 2122 and 2123 I'll see which one I like the best.
Yes, I did a search and found the timbers dialog, good stuff! I have the 2122 and 2123 I'll see which one I like the best.
There are currently 1 users browsing this thread. (0 members and 1 guests)
Posting Permissions
Reply With Quote