Page 7 of 7 FirstFirst ... 567
Results 91 to 96 of 96

Thread: Jbl 4367 ? .....

  1. #91
    Senior Member
    Join Date
    Nov 2008
    Location
    Gothenburg, Sweden
    Posts
    759
    I am tempted to do an power-compressnion measurement of my 4365s as a comparison, or is it out there? 4313b?
    Is it possible to measure power-compression correctly in-room?

  2. #92
    Senior Member audiomagnate's Avatar
    Join Date
    Jan 2011
    Location
    Colorado and Georgia
    Posts
    1,014
    Quote Originally Posted by bubbleboy76 View Post
    ...But still not "M2-perfect", right?
    But that's to be expected. I'm actually surprised it's as flat as it is, The rolloff in the 2340 was taken care of, and the dip centered at 11 or 12 K it tempered slightly, but that has to be audible to someone with decent hearing.

  3. #93
    Senior Member
    Join Date
    Nov 2010
    Location
    Urbandale, Iowa
    Posts
    142
    The dip around 11khz is about 4-5db relative to the frequencies on either side. Dips tend to be harder to hear than a peak of the same magnitude and at extremely low or high frequencies errors are harder yet to hear because of the ears declining sensitivity. I would venture to guess that the combination of the 11khz dip followed by the peak at 15khz would be heard as a single characteristic. Due to the high frequencies involved I would consider this audible under some conditions, but still a minor flaw.

  4. #94
    Senior Member Hoerninger's Avatar
    Join Date
    Jul 2005
    Location
    Germany
    Posts
    1,908

    White Paper


  5. #95
    Member
    Join Date
    Dec 2008
    Location
    Serbia
    Posts
    46

    T/S of 2216Nd-1 from 4367

    Hi ,
    are T/S parameters available for 2216Nd-1 or EDS?

    Thanks,
    Zeljko

  6. #96
    Junior Member
    Join Date
    May 2013
    Location
    Australia
    Posts
    2
    Quote Originally Posted by zeljkor View Post
    Hi ,
    are T/S parameters available for 2216Nd-1 or EDS?

    Thanks,
    Zeljko


    I'm also keen to find an Engineering Design Specification sheet for the 2216nd-1

    There is one around for the 2216nd, but not for the variant used in the 4367 it seems.....

    Can anyone help out??

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •