+ Reply to Thread
Results 1 to 4 of 4

Thread: Any one know any Info on a Amp

  1. #1
    Member
    Join Date
    May 2003
    Location
    nj
    Posts
    54

    Any one know any Info on a Amp

    Australion Monitor AM1600.
    Input sensitivity ?
    Power ?
    Specs ?
    Any info would be appreciated.
    Im asking because i am the engineer at a club that has 6 of these on midbass driving 24 TAD TL 1603 2 per channel loaded in modified DBL 15 Scoops & I would like to know more about this amp i cant find any info anywhere and the company does not support this amp or seem to want to answer any questions about this amp.
    Thanks in advance
    www.systemsbyshorty.com

  2. #2
    Senior Member jarrods's Avatar
    Join Date
    Feb 2004
    Location
    Australia
    Posts
    171
    Australian Monitor AM1600 Power Amplifier
    2 x 800W @ 4 ohms
    2 x 525W @ 8 ohms
    1800W in bridge mono

    sorry thats all i can find at the moment. i do (did ??) have a full pdf datasheet somewhere as i was going to buy one earlier this year. they are great amps (but have fan noise). my brother has one and its big brother on his 4435's system.

  3. #3
    Senior Member
    Join Date
    Apr 2003
    Location
    Toronto
    Posts
    3,736

    Am1600

    Hi

    FWIW:

    Some Design Features: ( from a 1994 brochure )

    (i) MOSFET design
    (ii) 1 shared ( dual secondary ) Toroidal transformer
    (iii) balanced inputs
    (iv) dual speed fans
    (v) input impedance ; 25 Kohms
    (vi) input sensitivity ; .92 volts
    (vii) FR ( 3 db down points ) ; 5hz - 90kHz
    (viii) Damping Factor ; > 650:1
    (ix) Weight ; 66 lbs ( 30kg )
    (x) 2 rack space

    Output Power : ( for a 1600 mk11 )
    - AM 1600S ( studio ) does not have 2 ohm cabability

    (A)20hz to 20kHz at .1% THD
    (i) 8 ohms = 470 watts ( both channels driven )
    (ii) 4 ohms = 800 watts ( both channels driven )

    (B) 1kHz < .05% THD
    (i) 8 ohms = 510 watts ( both channels driven )
    (ii) 4 ohms = 820 watts ( both channels driven )
    (iii) 2 ohms = 1100 watts ( both channels driven )

    <. Earl K

  4. #4
    Senior Member paragon's Avatar
    Join Date
    May 2004
    Location
    Germany
    Posts
    961

    Mod

    Show us a pic of these 4520.

    Eckhard

+ Reply to Thread

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. Which amp to match JBL 4315?
    By JackyTran in forum Lansing Product General Information
    Replies: 8
    Last Post: 06-25-2008, 08:50 PM
  2. 250 Ti Biamp ( one or 2 amp ) ?
    By gerard in forum Lansing Product Technical Help
    Replies: 1
    Last Post: 11-29-2004, 10:10 AM
  3. bi amp from passive filter
    By gerard in forum Lansing Product Technical Help
    Replies: 11
    Last Post: 11-12-2004, 11:29 AM
  4. Amp for bass driver
    By Ken Schwarz in forum Lansing Product General Information
    Replies: 20
    Last Post: 08-29-2003, 07:26 PM
  5. Need info on Altec SS amplifier model 1590E
    By BigBusa in forum Lansing Product General Information
    Replies: 1
    Last Post: 07-01-2003, 01:18 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts