Results 1 to 10 of 10

Thread: L20T Placement?

Hybrid View

Previous Post Previous Post   Next Post Next Post
  1. #1
    analogman
    Guest

    L20T Placement?

    Hello,
    As I mentioned in a previous post I recently bought a pair of L20Ts. After living with them for a while I find them a bit "hard" and aggressive, most notably in the upper mids and highs. My room stinks and the set up is only temporary (checking them out after Ebay). They are currently on Heresys for stands in front of my Apollos, which are against the wall. They are about 5 and a half feet apart and about 3 and a half feet from rear wall to baffle. My listening spot is about 7 feet away. I live in a condo with an open floor plan, living room, dining area and kitchen really just one big truncated "L". Would someone more familiar with this speaker be so kind as to suggest some placement baselines so that I can at least be in the ball park when I start to experiment. I have proper stands but am not using them as the room is so cluttered and they would be in traffic. The room is shared with the TV, bookcases, my wife's desk and about a thousand LPs, not to mention the four Heresys and my beloved Apollos. I know I am trying to shoe horn them in to a less than optimal environment but it is the best I can do until I can liquidate some of my speaker accumulation. If you can decipher this ramble any and all help would be appreciated. Thank you for your time and consideration.

    With regards,
    Analogman

  2. #2
    Administrator Robh3606's Avatar
    Join Date
    Apr 2003
    Location
    Rocinante
    Posts
    8,204
    I would try to get them closer to the wall if you could. They are bass shy below 50hz so with no boundry reinforcement won't help too much. You handy?? You may want to consider building the 4406 network to give you some level control up top.


    Rob
    Attached Images Attached Images

  3. #3
    analogman
    Guest
    Thank you Robh,
    I guess I am handy, I am a mechanic by trade. As far as electronics I can follow directions and solder, that is about it. Building a crossover with L-pad is a bit more than I am interested in with these at this time, as I am not sure I want to keep them at this point. I am not scared to try a project like this, but compared to you guys I am just a novice (sourcing parts etc.). It would not be easy for me as I am not "set up" like a serious hobbiest.
    Thank you again,
    Analogman

  4. #4
    analogman
    Guest
    ...That is why I am here, you Gentlemen are educating me! Thanks again!

    With regards,
    Analogman

  5. #5
    analogman
    Guest
    Yes, indeed, they are bass "shy". I am convinced that my perceived "hardness" is due to my poor placement which in turn is exacerbating the mids and highs. Specific placement suggestions welcomed.
    Thanks again,
    Analogman

  6. #6
    Senior Member Don C's Avatar
    Join Date
    Apr 2003
    Location
    Santa Rosa CA
    Posts
    1,722
    I keep mine right against the wall and very close to room corners.

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. Placement of 4425s
    By ooppalla in forum Lansing Product Technical Help
    Replies: 2
    Last Post: 09-18-2004, 03:31 PM
  2. speaker placement
    By CLASS A in forum Lansing Product General Information
    Replies: 4
    Last Post: 09-18-2004, 03:24 PM
  3. Difference between L20T and L20T3?
    By cary in forum Lansing Product General Information
    Replies: 2
    Last Post: 07-12-2004, 09:04 AM
  4. The placement of one or several subwoofers.
    By Niklas Nord in forum Lansing Product General Information
    Replies: 4
    Last Post: 11-11-2003, 03:47 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •