Another LE15A question

[tjm001]

In a previous post I stated I was going to use my LE15As in a L300-like enclosure. I realize that LE15As are usually mounted with those 4 cast black clamps. My question is whether there would be any problem mounting them with screws through the holes on the rim like the 136As? Thanks.

[Mr. Widget]

They can be mounted with sturdy bolts. The clamps are not necessary. Realize the speakers are quite heavy.


Widget

[tjm001]

Thank you Mr. Widget. The enclosures are coming along quite well. I will post an update w/pictures soon. I will also have more questions about porting, crossovers, grill dimensions and shapes, etc.

Tom

[Wagner]

Thank you Mr. Widget. The enclosures are coming along quite well. I will post an update w/pictures soon. I will also have more questions about porting, crossovers, grill dimensions and shapes, etc.

Tom

Don't over torque them, just snug is good (turn the screw until it stops, then just enough so that you couldn't remove it by hand but ALMOST), AND in a criss-cross pattern

Beeswax on machine and wood screws helps too for nice even snugging and reducing particle board/MDF strip outs