Results 1 to 5 of 5

Thread: Help: Crossover schematic for JBL E110

  1. #1
    rehkop
    Guest

    Help: Crossover schematic for JBL E110

    Hi,

    is there a source for a crossover schematic for an E110 anywhere, or does any one in this forum have experience with this driver?

    Any Info is wellcome.

    Regards

    Peter

  2. #2
    Senior Seņor boputnam's Avatar
    Join Date
    Apr 2003
    Location
    northern california
    Posts
    6,142
    Usually not used with one, if in an instrument speaker application. They make guitar amps really, really sound great. Any of 'em!
    bo

    "Indeed, not!!"

  3. #3
    RIP 2011 Zilch's Avatar
    Join Date
    Jun 2004
    Location
    Berkeley, CA
    Posts
    9,963
    Peter:

    E110 and WHAT is the question. What other speakers are in your system? What is the application?

  4. #4
    rehkop
    Guest
    Hi Zilch,

    thank you for your reply, maybe you can help me. Here is the former question:

    http://audioheritage.org/vbulletin/s...ead.php?t=3715

    Nobody replied so I held the question more generally. If I had a frequency response of this driver it would be a great help too. How does it differ from the 2123 in the treble part? Are 6db and a Zobel enough for low pass. At what point should I cross? This box shall be used in home audio only. So no problems with directivity or overpowering. The box is a 31 Liter vented enclosure.

    Right now I will start using 1mH (6db) and the Zobel with 6,8mF and 8,2 Ohm on the E110.
    The Fostex FD600 will get a 4,7mF and 0,68mH (12db) filter with an attenuator of 4,7 and 5,8 Ohm.

    Regards

    Peter

  5. #5
    RIP 2011 Zilch's Avatar
    Join Date
    Jun 2004
    Location
    Berkeley, CA
    Posts
    9,963

    Peter:

    Looks like it will work, but you'd better wait for one of the crossover gurus here to chime in.

    The aluminum dome is not a problem. Supposedly, it serves to extend the high end, but I'm not sure it extends it as high as you're proposing to use it. The data sheet says response to 8K, tho.

    Here, again, somebody with the E110 curves at hand can answer that better for you.

    Enable your location display on your posts, please. We like to know where members are. It makes the connection a bit more personal as well....

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. JBL L40 crossover schematic...
    By D@VID in forum Lansing Product Technical Help
    Replies: 25
    Last Post: 04-04-2011, 05:06 AM
  2. JBL L 110 Crossover Schematic
    By vifa32144 in forum Lansing Product Technical Help
    Replies: 1
    Last Post: 07-12-2004, 08:04 PM
  3. 4612/ 4612A/ 4612OK crossover schematic?
    By GordonW in forum Lansing Product Technical Help
    Replies: 6
    Last Post: 03-09-2004, 07:59 PM
  4. Altec Model Nineteen Crossover Schematic Needed
    By SteveC in forum Lansing Product Technical Help
    Replies: 0
    Last Post: 10-16-2003, 05:13 AM
  5. JBL LX 44 crossover schematic...
    By D@VID in forum Lansing Product Technical Help
    Replies: 1
    Last Post: 10-06-2003, 06:22 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •