Hello

I finally choose to build a pair of L250Ti for my first dy project .
hesitate with 4425 but ....

I would need some help ( Giskard , Earl K , Class A )

Looking at the thread and jpg : http://www.audioheritage.org/vbullet...=250ti+jubilee

I need to understand the following as I do not nothing about Xover !!!.

1- Uhf shows 4 capacitor ( 2 and 2 in serial ) this makes 6.3 uf If I am not wrong ????
Why not using a 6.00 and 0.3 capacitor then ????

Is is a 18db xover , so if it is 6 ohms this shouud give about 5.5 k ? ( wrong or not ) ?

The capacitor used are 100v and it seesm godd quality are rated over 400 v ? Why 100v

As I can't find used xover or pcb , I will have to make it , so I need ti understand what I am doing .

2. Cabinet

I can't see really if there is 4 separation ( thre is black and white for separation ) .
If yes then the woofer should be in a 13.5" high cabinet
Is the woofer in a close cabinet or is there an event behind ? ( can't see really ) .

I intend to use le14H , Le8T ( because I have a pair , I may change after for 108H , Le 5 or 104H , 035Ti .

I really would appreciate some help and that you understand I am not confident with but I really want to try and succed as it will be my first Diy .

regards

Gerard