Results 1 to 4 of 4

Thread: JBL 4408 tweeter recharge.

  1. #1
    Junior Member
    Join Date
    Jul 2012
    Location
    Danville, CA
    Posts
    23

    JBL 4408 tweeter recharge.

    Hi, restored a pair of 4408 studio monitors a while back. During the process, one of the tweeters sounded dull or not as high as the other in volume. I thought it was gone and nearly threw it away. Later when I bought a replacement online, I learned that I should try recharging the magnet. Is this worth a shot. I mean the tweeter does have clear sound coming out of it but at a reduced volume. Also if this is true, any shops in the Bay Area that recharge magnets? Thanks. BTW the tweeter is the JBL 035ti.

  2. #2
    Senior Member Ed Zeppeli's Avatar
    Join Date
    Dec 2007
    Location
    Nanaimo, BC
    Posts
    609
    Quote Originally Posted by mtsaclander View Post
    Hi, restored a pair of 4408 studio monitors a while back. During the process, one of the tweeters sounded dull or not as high as the other in volume. I thought it was gone and nearly threw it away. Later when I bought a replacement online, I learned that I should try recharging the magnet. Is this worth a shot. I mean the tweeter does have clear sound coming out of it but at a reduced volume. Also if this is true, any shops in the Bay Area that recharge magnets? Thanks. BTW the tweeter is the JBL 035ti.

    I'm not confident that it is a common problem that the tweeters get de-magged. I could be wrong.

    Maybe you could try a few other things first to eliminate any upstream problems. Swap tweeters between cabinets; check resistance (compare tweeters); and even check the fine voice coil leads for a possibly weak connection there.

    I have the same speakers and recently had to repair one of those leads.


    Good luck,

    Warren
    DIY Array, 2242 sub, 4408, 4208, Control 8SR, E120 Guitar cab, Control 1, LSR305.

  3. #3
    Senior Member Don C's Avatar
    Join Date
    Apr 2003
    Location
    Santa Rosa CA
    Posts
    1,722
    It might be more relevant to check for rotted foam behind the dome, and replace it.

  4. #4
    Junior Member
    Join Date
    Jul 2012
    Location
    Danville, CA
    Posts
    23
    Ok thanks a bunch Ill try both recommendations. Ill post an outcome later.

    Brett

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. recharge Alnico V mags
    By robertbartsch in forum Lansing Product Technical Help
    Replies: 60
    Last Post: 01-21-2009, 12:37 PM
  2. Recharge and Service
    By AlnicoRecharge in forum Lansing Product General Information
    Replies: 1
    Last Post: 09-11-2007, 06:31 PM
  3. ALNICO recharge
    By rbrooks7 in forum Lansing Product Technical Help
    Replies: 6
    Last Post: 02-27-2005, 02:48 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •