5732 crossover and polarity question

[David Lutz]

For the 5732 HF section JBL recommends for the DSP parameters to Invert the output polarity for the horn driver.

For now I am using an Ashley Crossover and not a DSP . Should I reverse the wiring and connect the (-)lead to the (+) on the driver?

Thanks for any advise

[Jonas_h]

For the 5732 HF section JBL recommends for the DSP parameters to Invert the output polarity for the horn driver.

For now I am using an Ashley Crossover and not a DSP . Should I reverse the wiring and connect the (-)lead to the (+) on the driver?

Thanks for any advise

Is polarity invert the only thing JBL has in the presets? You will be missing delay and other filters as well with the solution you are doing now, which will definately not be an optimal solution.

Nice speakers btw!