4333 cabinet build help.

[bldozier]

These are a few files ive found on the site, the cab, Im matching is the studio gray. With a 3/4 lip. And no veneer or trim.
1. The total length of the cab as pictured, 30 5/8 less the inch thickness from the top gives 29 5/8. Correct?

2. So (2) sides are 29 7/8 with 1/4 inches for the miter joint into tops and bottoms. Correct. 29 5/8 + 1/4.

3 so my question baffle seems and rear pannel to be 3/4 short, at 29 1/8. Minimum I would think it should be 29 5/8 assuming im not using a top 1/4 miter.

Please help.

[bldozier]

So I see im not adding tne bottom 1 inch pannel.

So the sides should be 30 5/8 less 2" at 28 5/8. 28 5/8 plus (2) 1/4s for the miter, are 29 1/4.
The baffle is Now an 1/4 to big. 28 5/8 + (2) 1/4s
help.

[bldozier]

Got it now 28 5/8 + 1/2 = 29.125 or 29 1/8.
Sorry for the confusion
brian