I know the Audiocap PPT Theta is well thought of here and I have taken that advice and applied it to projects past with good results; I will continue to use them with all things JBL

I am in the process of restoring a pair of speakers that fellow with an old Telefunken radio (actually, a tube receiver); I am not absolutely certain what the outcome will be except to say that after re-capping all 6 drivers will be working! (but just how well will have to remain to be seen; they were not taken very good care of)

So, when I replace the original electrolytics that Telefunken used back in 1963, I figure I might as well install a by-pass, on the tweeters and mids, while the soldering iron is hot; something good enough to leave in place if the drivers all work well, but not expensive enough to warrant removal if they don't

Has anyone used these cheaper alternatives and what were your impressions (if any)

http://www.parts-express.com/dayton-...citor--027-450

I will be using the Dayton 1% polypropylenes unless someone suggests a good reason not to

And last but not least; please send me some good vibes for my boy; they shipped him back over to Afghanistan this past weekend

Thank you