Hi All,
Seeking authentication. Foilcals say 16 ohms but they measure in at around 6.2.
Do they seem legit to you?
TIA!
Hi All,
Seeking authentication. Foilcals say 16 ohms but they measure in at around 6.2.
Do they seem legit to you?
TIA!
6.2 DCR is correct as DCR is what you measured, not the driver impedance
Not so sure about the diaphragms, I always thought that the underside of the assembly should have a gold color.
gold is the later color - back then all the "rings" were natural aluminum.
They look correct but the picture(s) are very poor..
sub
Would these (2410 diaphragms) have the distinctive small dent?
I seem to recall a post and pictures regarding a small distinguishing
defect in the forms... pictures here are too fuzzy to see that level
of detail.
I apologize for the crappy pics, here is a better one. Judging by a quick RTA sample, I would have to say that they are the real deal.
They track each other well and respond to beyond 15khz.
Found it, seems as though the bump was on 175 'phragms until the mid 50s or so - probably a little early for this pair.
http://www.audioheritage.org/vbullet...l=1#post293934
There are currently 2 users browsing this thread. (0 members and 2 guests)