+ Reply to Thread
Results 1 to 14 of 14

Thread: 18" Corner Horn

  1. #1
    Senior Member paragon's Avatar
    Join Date
    May 2004
    Location
    Germany
    Posts
    961

    18" Corner Horn

    Look this
    Attached Images Attached Images  

  2. #2
    Senior Member paragon's Avatar
    Join Date
    May 2004
    Location
    Germany
    Posts
    961

    and this

    2.
    Attached Images Attached Images  

  3. #3
    Senior Member paragon's Avatar
    Join Date
    May 2004
    Location
    Germany
    Posts
    961

    Frequency range !!

    Response
    Attached Images Attached Images  

  4. #4
    Senior Member paragon's Avatar
    Join Date
    May 2004
    Location
    Germany
    Posts
    961

    Sim

    Sim without adding low frequency
    Attached Images Attached Images  

  5. #5
    Senior Member paragon's Avatar
    Join Date
    May 2004
    Location
    Germany
    Posts
    961

    Sub

    No one interesstied in this great sub ???

    Eckhard

  6. #6
    Super Moderator yggdrasil's Avatar
    Join Date
    Dec 2004
    Location
    Bodø, Norway
    Posts
    1,129
    I think it seems very interesting. Tell me more, like expected frequency response, dimensions et.c.
    Johnny Haugen Sørgård

  7. #7
    Senior Member paragon's Avatar
    Join Date
    May 2004
    Location
    Germany
    Posts
    961

    Dim

    Dimensions are 1038 (H) x 752 (W) x 749 (D) mm. Reponse you can see on pic 3, very low for a "small" corner horn with a little help from subamp at 30 Hz.
    Max output is 130 dB at 200 Watts with this cheap 18" driver.
    Will build one later with my 18" Craaft driver.

    Eckhard
    Attached Images Attached Images   

  8. #8
    Super Moderator yggdrasil's Avatar
    Join Date
    Dec 2004
    Location
    Bodø, Norway
    Posts
    1,129
    Very interesting. Please post updates as your project emerges.

    Do you know the frequency response of the Paragon?
    Johnny Haugen Sørgård

  9. #9
    Senior Member paragon's Avatar
    Join Date
    May 2004
    Location
    Germany
    Posts
    961

    Paragon

    No sorry, think you want to know the "low response".
    Tried a sim month ago and i think lowest usable reponse is at 45-50 Hz because of the small mouth opening and short horn.
    Ask Oldmics for the paragon, he can tell you something about. Upper response may be at 15 KHz (075).

    Eckhard

  10. #10
    Senior Member Wardsweb's Avatar
    Join Date
    Apr 2003
    Location
    Texas
    Posts
    801
    Nice project. I really like bass horns. Kind of a modified Khorn bass cabinet. You could also add some driver(s) to make a nice 2 or 3 way speaker. Maybe a mid-horn laid on top and a 077 mounted in the face towards the top.

  11. #11
    Senior Member paragon's Avatar
    Join Date
    May 2004
    Location
    Germany
    Posts
    961
    Yes, but look at response, you can only use this till 150 Hz, so it`s only a subwoofer.

    Eckhard

  12. #12
    Senior Member JBLGUY's Avatar
    Join Date
    Dec 2004
    Location
    Waterloo Canada
    Posts
    110
    My Buddy makes his own 18 inch Corner cabinets. They are very large and heavy. They definatly go lower than a 15 inch corner cab. He has a new disign for this 18 inch and the first pototype was very impressive. The new cabinets go down to about 23hz. He increased the back chamber. This made a huge differance. unfortunatley this new cab weighs over 300 lb's


    If anyone has any interest let me know


  13. #13
    Senior Member paragon's Avatar
    Join Date
    May 2004
    Location
    Germany
    Posts
    961

    18 inch horn

    Yes but it also increases(?) the cone movement. So sim it and you see what you get. But beleive, this is one of the best subs you can get !!

    Eckhard

  14. #14
    Senior Member paragon's Avatar
    Join Date
    May 2004
    Location
    Germany
    Posts
    961

    Craaft 18 inch driver

    I will use this horn with an 18" Craaft driver which also works in this sub chamber and i will post response of this when i`m finished.

    Eckhard

+ Reply to Thread

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. Horn loaded 2105
    By pangea in forum Lansing Product General Information
    Replies: 11
    Last Post: 07-28-2008, 01:40 PM
  2. NEW 1.5 inch horn for 4345 / 4343
    By subwoof in forum Lansing Product DIY Forum
    Replies: 114
    Last Post: 07-23-2008, 06:47 AM
  3. Sub1500 In Altec Corner Horn ??
    By mrbluster in forum Lansing Product Technical Help
    Replies: 10
    Last Post: 01-11-2005, 02:24 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts