Results 1 to 13 of 13

Thread: Just getting started

  1. #1
    Junior Member
    Join Date
    Nov 2014
    Location
    RATHDRUM ID
    Posts
    11

    Exclamation Just getting started

    So i inheritated a system which consists of grand integra m508 amp and p308 pre amp. Paired with jbl 4311wx a. Is this a good system match

  2. #2
    Moderator hjames's Avatar
    Join Date
    Nov 2005
    Location
    NoVA - DC 'burbs
    Posts
    8,548
    Quote Originally Posted by GUIBEY20 View Post
    So i inheritated a system which consists of grand integra m508 amp and p308 pre amp. Paired with jbl 4311wx a. Is this a good system match
    Ask 2 times and you still get 1 reply!
    be patient - some of us have a life outside the forums!

    What do you mean by Good?
    What I mean is - how do you like the way it sounds?
    When it comes to audio systems, what matters is what YOU like about the way a system sounds, don't you think?

    I have had different kinds of systems with different sounds over the years -
    I like many of them for different reasons -
    but ultimately, its how it makes your music sound!
    2ch: WiiM Pro; Topping E30 II DAC; Oppo, Acurus RL-11, Acurus A200, JBL Dynamics Project - Offline: L212-TwinStack, VonSchweikert VR-4
    7: TIVO, Oppo BDP103D, B&K, 2pr UREI 809A, TF600, JBL B460

  3. #3
    Junior Member
    Join Date
    Nov 2014
    Location
    RATHDRUM ID
    Posts
    11
    So as you can see i'm new to all of it including the posting x2 my bad what i guess i need to know are the components compatable? I have no knowledge of stereo components

  4. #4
    Administrator Mr. Widget's Avatar
    Join Date
    Apr 2003
    Location
    San Francisco
    Posts
    9,735
    Quote Originally Posted by GUIBEY20 View Post
    So as you can see i'm new to all of it including the posting x2 my bad what i guess i need to know are the components compatable? I have no knowledge of stereo components
    Yes they are compatible... are they the ultimate in bringing out the best in each other? I don't know, but I imagine they will perform well enough together to make you happy.


    Widget

  5. #5
    Junior Member
    Join Date
    Nov 2014
    Location
    RATHDRUM ID
    Posts
    11
    THANKS MR WIDGET I WILL PROBABLY HOOK IT ALL UP THIS WEEKEND AND PUT ON SOME DOOLIN DALTON
    AND SEE WHAT IT SOUNDS LIKE. MY ROOM IS SMALL WITH CARPET ANY SUGGESTIONS ON ADJ OR PLACEMENT?

    ie speaker stands, verticale or horizontal? or are these ALL THINGS ARE ABOUT PERSONAL PREFERENCE?

  6. #6
    Senior Member gferrell's Avatar
    Join Date
    Jan 2010
    Location
    Styx , NC
    Posts
    479
    I think you will be pleased with the sound if everything works properly. Very pleased. They should work great in a small carpeted room.
    XPL 200's w DX1, XPL 160's, XPL 140's, L7's, L5's, L3's, L1's Homemade L Center, 4412's, 4406, L60T's, L20T's

  7. #7
    Administrator Mr. Widget's Avatar
    Join Date
    Apr 2003
    Location
    San Francisco
    Posts
    9,735
    Quote Originally Posted by GUIBEY20 View Post
    MY ROOM IS SMALL WITH CARPET ANY SUGGESTIONS ON ADJ OR PLACEMENT?

    ie speaker stands, verticale or horizontal? or are these ALL THINGS ARE ABOUT PERSONAL PREFERENCE?
    The 4311 was designed to be vertical or horizontal... but definitely at ear level. If you put them on short floor stands you will need to flip them upside down to get the mids and tweeters off the floor.

    Depending on your personal taste you may want them near corners or far away from them. Placement near corners or to a lesser extent walls or wall/ceiling, wall/floor locations will increase the low end output.


    Widget

  8. #8
    Junior Member
    Join Date
    Nov 2014
    Location
    RATHDRUM ID
    Posts
    11
    Thanks for the advice. I slo have a pair of jbl l50's will they work with the onkyo integra m508 amp as well?

  9. #9
    Junior Member
    Join Date
    Nov 2014
    Location
    RATHDRUM ID
    Posts
    11
    i'm also seeking advice on weather i can run two amplifiers off my onkyo p308 preamp. if so do i use a y cable or plug the second amp into out 2?

  10. #10
    Senior Member grumpy's Avatar
    Join Date
    Oct 2003
    Location
    SoCal
    Posts
    5,743
    Yes on the L50s. Is there something you're worried about?

    Quote Originally Posted by GUIBEY20 View Post
    i'm also seeking advice on weather i can run two amplifiers
    off my onkyo p308 preamp. if so do i use a y cable or plug the second amp into out 2?
    Yes, and yes. If you need to adjust the relative level of the second amp, use output 2.
    The adjustment (nice to have, and unusual on a preamp) is probably under the dropdown
    panel.

    Manuals are a great help.

  11. #11
    Junior Member
    Join Date
    Nov 2014
    Location
    RATHDRUM ID
    Posts
    11
    being new to thisw i was worried about the amp having to much power. thanks for the advice

  12. #12
    Senior Member grumpy's Avatar
    Join Date
    Oct 2003
    Location
    SoCal
    Posts
    5,743
    There is no such thing as a consumer amp having too much power. There can be a issue with insufficient
    power, but ultimately, you control the volume...not the amp. If it sounds bad or hurts your ears, turn it
    down. If a home system is used for unintended things (impromptu PA, hammering a ported system below
    its resonant freq, sustained high power "test" tones,...), bad stuff can happen, regardless of an amplifier's
    rating.

    Don't get crazy or expect massive 20Hz bursts and you should be fine

  13. #13
    Junior Member
    Join Date
    Nov 2014
    Location
    RATHDRUM ID
    Posts
    11
    thanks i'll be hooking up the L50's tonight and getting the 4311's reworked.

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. 126a started ratteling. What are my choices?
    By warpig in forum Lansing Product Technical Help
    Replies: 0
    Last Post: 09-07-2012, 09:02 AM
  2. 9846 Build has started.
    By arawak1969 in forum Lansing Product DIY Forum
    Replies: 1
    Last Post: 11-20-2011, 05:01 PM
  3. What started it all ...
    By richluvsound in forum General Audio Discussion
    Replies: 26
    Last Post: 03-03-2011, 11:17 PM
  4. I'm just getting started 4343 monitors
    By juxtaposed in forum Lansing Product DIY Forum
    Replies: 3
    Last Post: 10-31-2009, 12:15 PM
  5. New speakers started!!!!!!!
    By quindecima in forum Lansing Product DIY Forum
    Replies: 0
    Last Post: 10-06-2006, 05:00 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •