Hi,

I gathered from the JBL Tech Note "Choosing JBL Low Frequency Transducer" that the 2220H actually can go quite high to about 4-5 khz before it starts to tapered off quickly due to cone breakup.

May I know if I could use the 2220H to 2.5 khz and cross it to a 2402H ? I noticed for this configuration usually the woofer used is D130/D130F. What would be the main difference between the 2220H and the D130F when crossing at 2.5 khz since both drivers seemed to be able to hit that frequency.

Thanks.