Has anyone here used REW or similar on your Mac to do measurements? Has anyone tried the miniDSP UMIK-1 with a Mac. Any other ideas to measure with on a Mac.
Thanks for any input.
Has anyone here used REW or similar on your Mac to do measurements? Has anyone tried the miniDSP UMIK-1 with a Mac. Any other ideas to measure with on a Mac.
Thanks for any input.
Always fun learning more.......
Tried REW a few versions back... wanted a very loud output. Might be
more stable and flexible now (many features!). I'm sure I'll play with it again
when I get back into test mode.
I never had the gear to attempt any auto-EQ or target curve programming
of an external box.
I had more luck with Fuzzmeasure, but I don't think it interacts with external
crossover/dsp units the way REW can.
I use MiniDSP, but have no experience with MAC.
UMIC-1 can be used on MAC.
You can find info about REW and MAC on the forum;
http://www.hometheatershack.com/
43XX (2235-2123-2450-2405-CC 3155)5235-4412-4406-4401-L250-18Ti-L40-S109 Aquarius lV-C38 (030) 305P MkII
The latest Beta version of REW has circumvented most ( if not all ) of the earlier problems that it previously had running on a Mac .
There's no doubt it was flakey ( if it even ran ) .
The latest version ( Beta 23 ) only works with Macs running 10.7.3. and higher .
UMIK-1 mic ?
- While very convenient , using one means the measurement system can't do system timings ( one needs a 2-chnl soundcard with one chnl set as a loopback for timing purposes with the other chnl handling the pre-amp duties for the external test mic ) .
Thanks for the replies guys.
It looks like my Focusrite 2i2 works on a Mac too, although I just upgraded to 10.10 and it is not listed I am sure it will be soon.
Has anyone tried using Windows with Bootcamp? Does it pass hardware straight through to windows, or is there a software layer between the hardware and windows.
I ask these questions because I would like to have just one laptop to do multiple things except gaming (that is a windows/high end pc thing for my kids and I!!)
Earl have you tried this setup?
Always fun learning more.......
No ( I don't think so ) but I do own the same Focusrite 2i2 .
These days I'm mostly a PC guy ( though I also run 3 Macs of various vintages / the newest using a Power PC chip running 10.5.7 ) .
I would simply join HTS and then download the latest Mac Version of REW . And give it a go .
Here's a direct link to REW v5.01 beta 23 for Mac ( the link won't work unless you're a forum member of HTS ) .
Thanks Earl I will give it a try!!
I am mostly a PC guy as well but got a pretty fantastic deal on a new 15" 2014 MacBook Pro. I have never been a Mac guy but I wanted to "Giver a try".
It is a very well made machine!!
Always fun learning more.......
I'd skip bootcamp. Parallels allowed me to run Fuzzmeasure under MacOS on one screen and London Architect under win7 on another... Really sped up the measure/adjust cycle. I've had better luck with Parallels and i/o specific hardware (like usb/serial adapters) than with VMware, but I expect both have converged in competition for usability (and I haven't tried VMware recently). Much more convenient than rebooting between programs.
If you go this way, I'd recommend maxing out the RAM (if not at 16GB already).
Yes my MBP is a 2.5Ghz i7 with a gforce GTX750 and 16GB and 512SSD.
It really appears that Fusion has a bit better IO than Parallels but they are both very close in a side by side comparison. I will try the demo versions and see how it goes.
Thanks (Dude) Grumpy!!
Always fun learning more.......
The latest version of REW runs on a mac without many issues. Remember to donate, these guys have to eat.
There are currently 1 users browsing this thread. (0 members and 1 guests)