Page 1 of 2 12 LastLast
Results 1 to 15 of 57

Thread: Check this out! original everest and K2 cabinets from the factory in denmark!

Hybrid View

Previous Post Previous Post   Next Post Next Post
  1. #1
    Junior Member a_fossen's Avatar
    Join Date
    Jun 2007
    Location
    norway
    Posts
    15

    Check this out! original everest and K2 cabinets from the factory in denmark!

    Name:  jbl 3.jpg
Views: 8693
Size:  68.4 KBName:  jbl 2.jpg
Views: 6771
Size:  82.9 KBName:  everest.jpg
Views: 5736
Size:  64.7 KBhttp://www.auktionshuset.dk/LotList.aspx?aid=121&ps=50&p=1&s=&o=1&h=trueJust scrool down to the end of the page. http://www.dba.dk/hoejttaler-jbl-dd-...e/id-94072847/http://www.dba.dk/hoejttaler-jbl-eve...d/id-94072945/

    Something for the diy? I have to admit that this is tempting.

    http://www.dba.dk/hoejttaler-jbl-pro...2/id-94072936/

    These K2,s have serial number, i see some problem buying everest and K2's in the future in scandinavia.............

    Edit here is the complete jbl catalog from the auction house in denmark.http://www.auktionshuset.dk/LotList....jbl&o=0&h=truea_fossen Norway.
    Last edited by a_fossen; 09-27-2014 at 01:14 AM. Reason: I saw the sn/numbers.

  2. #2
    Senior Member macaroonie's Avatar
    Join Date
    Jan 2005
    Location
    near Glasgow Scotland
    Posts
    2,288

    Amazing post

    Just in case this slips past un noticed it looks like the Danish Cabinet works , ' Hornslet ' has gone into recievership.
    Hornslet are/were the cabinet maker for JBL , Linn , Naim , Proac , Dali etc All top stuff
    As a result they are flogging off all the stock of complete or partially finished cabinets.
    For anyone wanting to embark on a DIY Everest of most varieties the cabs are there to be had and for LOW money

    FYI the prices are in Danish Krone. 1 Dan Kr = 17cents = 11 uk pence = 13 euro cents.

    Pair of almost finished DD67000 boxes for 300 quid , holy cow !!!!!!

    Here's a couple of pics for interest sake , these are at the early build stage but they have many that are more or less good to go , just need drivers and Hardware ( That of course is another problem )
    So don't be late to the party folks , this is one of those never to be seen again moments if you are into homebrew or whatever.

    Name:  406_1_635454544519422648.jpg
Views: 4427
Size:  74.6 KB

    Name:  463_1_635454548060001513.jpg
Views: 5423
Size:  46.8 KB

  3. #3
    Senior Member Odd's Avatar
    Join Date
    May 2009
    Location
    Oslo, Norway ------ Now Portugal
    Posts
    812
    An incredible opportunity, but it's a bit far to drive down. 780 km x 2

    From Oslo
    43XX (2235-2123-2450-2405-CC 3155)5235-4412-4406-4401-L250-18Ti-L40-S109 Aquarius lV-C38 (030) 305P MkII

  4. #4
    Senior Member macaroonie's Avatar
    Join Date
    Jan 2005
    Location
    near Glasgow Scotland
    Posts
    2,288
    Why don't you Norway and Sweden fellows get together and take a van down , make an outing of it.
    You know the thing , beer , polser, Tivoli gardens. ( Esrom cheese !!!! )

    Do it for Rolf , he'd have been there already

  5. #5
    Junior Member high sky's Avatar
    Join Date
    Apr 2014
    Location
    Denmark
    Posts
    15

    Made In Denmark

    Hi-fi.....ve

    As a danish sound geek, it is a shame that they no longer produce the cabinets in Denmark.
    But I think all of us Everest dreamers see a opportunity. But isn´t the midtone the challenge. And how to produce the rest of the horn.

    But wauuu they look good.

  6. #6
    Senior Member ivica's Avatar
    Join Date
    Jan 2008
    Location
    serbia
    Posts
    1,703
    Quote Originally Posted by high sky View Post
    Hi-fi.....ve

    As a danish sound geek, it is a shame that they no longer produce the cabinets in Denmark.
    But I think all of us Everest dreamers see a opportunity. But isn´t the midtone the challenge. And how to produce the rest of the horn.

    But wauuu they look good.
    About H66000 - horn, may be some help can be get from our forum member JAN-DAUGAARD

    http://www.audioheritage.org/vbullet...8-Jan-Daugaard

    regards
    ivica

  7. #7
    Administrator Mr. Widget's Avatar
    Join Date
    Apr 2003
    Location
    San Francisco
    Posts
    9,740
    Quote Originally Posted by high sky View Post
    Hi-fi.....ve

    As a danish sound geek, it is a shame that they no longer produce the cabinets in Denmark.
    But I think all of us Everest dreamers see a opportunity. But isn´t the midtone the challenge. And how to produce the rest of the horn.

    But wauuu they look good.
    Without the correct drivers any DIYer will only have a speaker that looks like an Everest. Unfortunately JBL no longer supports the DIY community so getting the correct parts is extremely difficult. Even as a dealer, I can not order them except as replacements for damaged units.


    Widget

  8. #8
    Junior Member a_fossen's Avatar
    Join Date
    Jun 2007
    Location
    norway
    Posts
    15

    630 km.

    I get 630 km from oslo + boat. 133 to larvik and 182 from hirthals to hornslet denmark. For me its definitive worth the tripp Name:  jbl 4.jpg
Views: 5024
Size:  60.8 KB

  9. #9
    Administrator Mr. Widget's Avatar
    Join Date
    Apr 2003
    Location
    San Francisco
    Posts
    9,740
    Sad to hear of another business disappearing.

    If any of you do pick up Everest cabs, I can help you with the horns.


    Widget

  10. #10
    Senior Member Odd's Avatar
    Join Date
    May 2009
    Location
    Oslo, Norway ------ Now Portugal
    Posts
    812
    We'll see how the auction goes.

    a fossen. Would you drive down? Do you have a suitable car?

    Send me a PM
    43XX (2235-2123-2450-2405-CC 3155)5235-4412-4406-4401-L250-18Ti-L40-S109 Aquarius lV-C38 (030) 305P MkII

  11. #11
    Senior Member Odd's Avatar
    Join Date
    May 2009
    Location
    Oslo, Norway ------ Now Portugal
    Posts
    812
    Quote Originally Posted by Mr. Widget View Post
    Sad to hear of another business disappearing.

    If any of you do pick up Everest cabs, I can help you with the horns.


    Widget
    Yes, it's a shame. In this corner of the world we may soon not be able to produce something that requires a lot of labor force. The cost of labor is immense.
    Production may be moved China?
    43XX (2235-2123-2450-2405-CC 3155)5235-4412-4406-4401-L250-18Ti-L40-S109 Aquarius lV-C38 (030) 305P MkII

  12. #12
    Guest
    Join Date
    Dec 2009
    Posts
    0
    Quote Originally Posted by Mr. Widget View Post
    Sad to hear of another business disappearing.

    If any of you do pick up Everest cabs, I can help you with the horns.


    Widget

    Are you talking about help to get the original horns?
    I have the UHF horn with housing

    Ari

  13. #13
    Senior Member Jakob's Avatar
    Join Date
    Apr 2003
    Location
    Sweden
    Posts
    311
    Quote Originally Posted by Mr. Widget View Post
    Sad to hear of another business disappearing.

    If any of you do pick up Everest cabs, I can help you with the horns.


    Widget
    I just talked to Mats, he has to pass on this one. Claims he has too many projects going

    Widget, do the horns include the throat connection to the driver?

  14. #14
    Junior Member
    Join Date
    Oct 2014
    Location
    Denmark
    Posts
    2

    Horns for s9900

    Quote Originally Posted by Mr. Widget View Post
    Sad to hear of another business disappearing.

    If any of you do pick up Everest cabs, I can help you with the horns.


    Widget
    HI mr. widget

    I just bought a S9900 cabinet

    Could you also help with horns for the S9900?

    Søren K

  15. #15
    Guest
    Join Date
    Dec 2009
    Posts
    0
    There have bin good if they have S9800 enclosure
    I have both the horns for S9800 (H9800 UT-045Be) and I was going to use my 1500Al-1 and 476Be

    I like the chape of the S9900 enclosure but I think at there are inpossible to get the horn parts

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. Factory Original ORANGE Dust Covers On D120Fs?
    By toddalin in forum Lansing Product General Information
    Replies: 9
    Last Post: 02-25-2010, 02:34 PM
  2. Question! are these cabinets original JBL4520?
    By OLDGEN in forum Lansing Product Technical Help
    Replies: 16
    Last Post: 11-06-2008, 02:13 PM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •