Results 1 to 5 of 5

Thread: Extreme audio designs -- at their most audacious

  1. #1
    RIP 2021 SEAWOLF97's Avatar
    Join Date
    Jan 2006
    Location
    in "managed decline"
    Posts
    10,054

    Extreme audio designs -- at their most audacious

    .
    http://www.cnet.com/pictures/extreme...ious-pictures/

    MW shud like this .


    #5 = The OMA Cobbler prototype speaker

    This is a prototype of a speaker Weiss might call the Cobbler. It's a large, 80-pound "bookshelf" speaker that uses a vintage air motion transformer tweeter and a JBL woofer, both mounted on a 1-inch thick piece of water-jet-cut Pennsylvania slate, on a Pennsylvania black walnut cabinet.
    Some kind of happiness is measured out in miles

  2. #2
    Senior Member
    Join Date
    May 2009
    Location
    California
    Posts
    1,587
    Quote Originally Posted by SEAWOLF97 View Post
    .
    http://www.cnet.com/pictures/extreme...ious-pictures/

    MW shud like this .


    #5 = The OMA Cobbler prototype speaker

    This is a prototype of a speaker Weiss might call the Cobbler. It's a large, 80-pound "bookshelf" speaker that uses a vintage air motion transformer tweeter and a JBL woofer, both mounted on a 1-inch thick piece of water-jet-cut Pennsylvania slate, on a Pennsylvania black walnut cabinet.
    That one might have some real potential.
    Not crazy for the joinery but it certainly looks of quality materials.

    A friend of mine gave me a half section of 1" slate from a pool table. I had plans to cut it up into sections for a turntable platform and adding mass to various projects. Never got off the ground (not yet) and the slate is still out in the garage.

    Other than being highly reflective I think it might be a good building material for some things audio but damn it's heavy. these guys sure seem to like it.

  3. #3
    RIP 2021 SEAWOLF97's Avatar
    Join Date
    Jan 2006
    Location
    in "managed decline"
    Posts
    10,054
    Quote Originally Posted by Wagner View Post

    A friend of mine gave me a half section of 1" slate from a pool table. I had plans to cut it up into sections for a turntable platform and adding mass to various projects.
    I got this 1 inch thick piece of faux marble from a thrift for $3. I guessed, but was correct that it is just about perfect size to fit under the Denon.

    IF there had been any reaction to vibration with the TT before, it is surely gone now.

    and it was nice that the color was acceptable.
    Attached Images Attached Images  
    Some kind of happiness is measured out in miles

  4. #4
    Senior Member DavidF's Avatar
    Join Date
    Apr 2003
    Location
    Sonoma County CA
    Posts
    946
    Quote Originally Posted by SEAWOLF97 View Post
    I got this 1 inch thick piece of faux marble from a thrift for $3. I guessed, but was correct that it is just about perfect size to fit under the Denon.

    IF there had been any reaction to vibration with the TT before, it is surely gone now.

    and it was nice that the color was acceptable.
    Hey!! You're supposed to be making croissants or apple tarts on that slab.
    David F
    San Jose

  5. #5
    RIP 2021 SEAWOLF97's Avatar
    Join Date
    Jan 2006
    Location
    in "managed decline"
    Posts
    10,054
    Quote Originally Posted by DavidF View Post
    Hey!! You're supposed to be making croissants or apple tarts on that slab.
    darned thing is too heavy to clean in the sink.

    found it interesting that the big 2 way with the JBL LF also used my fave ESS Heil AMT mid/hf driver.

    http://www.cnet.com/pictures/extreme...us-pictures/5/
    Some kind of happiness is measured out in miles

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. Cabinet designs for 604 please
    By kn8243 in forum Lansing Product DIY Forum
    Replies: 6
    Last Post: 10-20-2010, 07:45 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •