Results 1 to 4 of 4

Thread: Grille mounting pegs

  1. #1
    Senior Member
    Join Date
    Jan 2008
    Location
    SoCal, USA
    Posts
    191

    Grille mounting pegs

    I need to replace a broken mounting peg on an L96; it uses this type of peg:
    http://www.ebay.com/itm/251606493589...84.m1423.l2649

    Where can I buy these new?



    I thought all vintage JBLs used the type of peg in the eBay ad below; I think my L100s do. When did they change the design?
    http://www.ebay.com/itm/261118618160...84.m1497.l2649

  2. #2
    Senior Member rdgrimes's Avatar
    Join Date
    Aug 2008
    Location
    New Mexico, USA
    Posts
    2,216
    You might even find different L96 revisions with different type pegs.

    My L96 appear to use the second type you posted, as do my L112 and L150A. Its hard to say without pulling one out.

    The only real difference is the size of the hole they need, the outer parts are much the same.

  3. #3
    Senior Member
    Join Date
    Jan 2008
    Location
    SoCal, USA
    Posts
    191
    Yes, the portion of the peg that fits into the grille frame is the same diameter on both types; the one I need has a smaller diameter (1/4" vs. 3/8") where it goes into the cabinet and seems to be less common. I found it was a pretty tight fit when I extracted the broken portion from the cabinet so maybe it was considered an "improved" design. Anyway I hesitate to buy any used ones like in the eBay listing because I think they would almost have to be slightly damaged during the process of getting them out.

  4. #4
    Senior Member rdgrimes's Avatar
    Join Date
    Aug 2008
    Location
    New Mexico, USA
    Posts
    2,216
    Somebody was making and selling new replacements at one point.

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. Grille mesh behind grille fabric. What to use?
    By jbl in forum Lansing Product Technical Help
    Replies: 6
    Last Post: 12-03-2008, 01:41 PM
  2. mounting model plates on grille
    By Hofmannhp in forum Lansing Product DIY Forum
    Replies: 1
    Last Post: 02-07-2007, 11:16 AM
  3. JBL Grille Pegs or Dowels
    By mech986 in forum Lansing Product Technical Help
    Replies: 0
    Last Post: 07-06-2004, 06:40 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •