Results 1 to 14 of 14

Thread: Paragon

  1. #1
    Junior Member
    Join Date
    May 2014
    Location
    United States
    Posts
    1

    Paragon

    I am new to this forum and trying to find some help on the JBL Paragon system. My father was a JBL dealer in St. Louis, MO during most of the 1960's. During this time, he had JBL make a Paragon for him personally. It was made with Brazilian Rosewood. This is unique as it was a custom finish and believed to be the only one like it as the standard wood option of Rosewood for the Paragon was not Brazilian. It has been in perfect working order through all of these years. He is now in his early 80's and considering a sale of this all original near perfect speaker system. I have looked on ebay and other similar sites and have found limited information. I was able to figure out the number stamp in the wood as well as the serial numbers that are on the paperwork in the back of the system. Any help or guidance would be appreciated. Also, he has a minigon that he may look at selling as well. Again, this one has also been in use in his home all of these years.

  2. #2
    Maron Horonzakz
    Guest
    I remember "BENDER" and the rosewood PARAGON,,,Its value can range from about $5000. On the low side to $20,000 on the high side..If you sell on the Pacific Rim..(Japan) Cost of shipping is a bitch..and would need packing crates,,,Make shure you get your money up front first,,, Harvy sold me my Marantz 10B tuner,,, Paragons in St. Louis didn't sell to well..$3000. to $4000. Ive had three PARAGONS plus Ive also made some,,You couldn't tell the difference from the factory units....

  3. #3
    Maron Horonzakz
    Guest
    Also KENRICK SOUND in Japan has made a couple of clone PARAGONS,,,selling for about $25,000...With special veneer and chrome plated drivers,,,

  4. #4
    Senior Member oldsoundz's Avatar
    Join Date
    Jun 2006
    Location
    SLC UT
    Posts
    739
    Pictures would be very nice. Maybe even one with your father near the Paragon?

  5. #5
    Senior Member BMWCCA's Avatar
    Join Date
    Feb 2006
    Location
    Virginia
    Posts
    6,964
    I remember Hi-Fi Showroom on Clayton and Best Sound on Manchester. Was Hi-Fi West on Lindbergh Blvd in Ladue or Olivette?
    I know longer remember everything I knew.

    Give my best to Harvey. Those truly were the good old days!
    ". . . as you have no doubt noticed, no one told the 4345 that it can't work correctly so it does anyway."—Greg Timbers

  6. #6
    Maron Horonzakz
    Guest
    HI FI WEST in OLIVETT,,,,,HI FI SHOWROOM on CLAYTON rd... Both my favorite spots to hang out..... Harvy and J Marshal were great gentleman for putting up with us...Both had PARAGONS on dispay...When Harvey got his rosewood PARAGON,,I was shocked at the beauty of the veneer...

  7. #7
    Senior Member jerry_rig's Avatar
    Join Date
    Dec 2008
    Location
    FL
    Posts
    173
    I bought a pair of LE-15As and a PR kit from Hi-Fi Showroom in 1975. There was also another dealer on Big Bend (Hi-Fi-Fo-Fum) near I-40 from whom I bought some D-123a, LE-20s and a crossover in 1973 to make a pair of monitors I took to college. Those were the days!

  8. #8
    Member
    Join Date
    Jan 2007
    Location
    St. Louis
    Posts
    77
    Tell Harvey we all say "Hi"!

    If you need any help, feel free to ring me - I live about 25 minutes away in south county. My cell is 314-651-9396. JBL Dog and JBL beer are both local, and they might have contacts to get you into the $$$$ they should command.

    You do not want to auction either at a live auction, as the last two Paragons auctioned in Missouri fetched only a third of their value, and then the owner paid a commission fee on top of the low gross. That is not the route to consider.

    Thanks,
    Dave

  9. #9
    Maron Horonzakz
    Guest
    Auctions of the PARAGONS were a disaster..price wize...But the condition of the speakers also play a role in final price,,,If the LE 15 woofers outer surround is hard and brittle,,Restoration is needed... Outer cabinet must be in good visual condition,,,, I witnessed two in the central west end,, That looked like they were kicked down the steps .. They were pretty chewed up...All this effects the price.. That's why I gave my range of $5000. to $20,000...It depends on condition...

  10. #10
    Senior Member tom1356's Avatar
    Join Date
    Jan 2006
    Location
    Boston
    Posts
    124
    Just a heads up.
    CITES prohibits exporting Brazilian Rosewood in any form for commercial purposes.
    Of course it is perfectly acceptable to sell it in the USA.

  11. #11
    Maron Horonzakz
    Guest
    HELL this was 40 years ago,,, I still got some ROSEWOOD I bought from CONSTATINES WOOD SUPPLIES..

  12. #12
    Senior Member
    Join Date
    Oct 2003
    Location
    Texas
    Posts
    1,732
    Quote Originally Posted by Maron Horonzakz View Post
    HELL this was 40 years ago,,, I still got some ROSEWOOD I bought from CONSTATINES WOOD SUPPLIES..
    You're fine, just don't try to take it out of the country.

  13. #13
    Senior Member tom1356's Avatar
    Join Date
    Jan 2006
    Location
    Boston
    Posts
    124
    Quote Originally Posted by Maron Horonzakz View Post
    HELL this was 40 years ago,,, I still got some ROSEWOOD I bought from CONSTATINES WOOD SUPPLIES..
    CITES only applies to Brazilian Rosewood. Indian Rosewood is still exportable.

  14. #14
    Administrator Mr. Widget's Avatar
    Join Date
    Apr 2003
    Location
    San Francisco
    Posts
    9,981
    Quote Originally Posted by tom1356 View Post
    CITES only applies to Brazilian Rosewood. Indian Rosewood is still exportable.
    Constantines sold both... I bought plenty of beautiful Brazillian Rosewood back in the day from them. I wish I had stockpiled extra.


    Widget

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. Paragon
    By smiley67 in forum Lansing Product General Information
    Replies: 39
    Last Post: 11-15-2007, 11:31 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •