Results 1 to 2 of 2

Thread: 8 Ohm 5K crossover and supertweeter in parallel to 16 Ohm mid horn leg

  1. #1
    Junior Member
    Join Date
    Feb 2014
    Location
    Silver Lake
    Posts
    1

    8 Ohm 5K crossover and supertweeter in parallel to 16 Ohm mid horn leg

    I have been happily using two JBL theater speakers from the 1960s. The old cabinets with two 32 Ohm 15" drivers in a big bass horn and the earlier 3160 crossover driving the 375 driver and midrange horn and lens, powered by a McIntosh MC2120. The horn is 16 Ohm and rolls off over 9K. I recently added an Eminence 8 Ohm crossover (at 5K) and an Eminence supertweeter in parallel with the mid horn circuit to get the top octave. The fellow at Eminence said that there would not be any problem as the 5K crossover point would not degrade the mid horn's performance or impedance, or affect the JBL crossover. I added 8 Ohm L-pads to quiet the supertweeters a bit and things sound good. Does anyone see an audible or electrical problem with this setup?

    Also, is there a test or practical way to decide if a horn driver should be wired the same polarity as the woofer, or opposite polarity? I have a 3115A network. I am curious about phase relationships. Perhaps the images will help.

    pix -

    Theater speaker with supertweeter on top of mid horn, next to Lava Lamp.
    The head is a Theremin.


    Two ways to wire drivers to 3115A for another system.
    Attached Images Attached Images   

  2. #2
    Senior Member
    Join Date
    Apr 2012
    Location
    Houston
    Posts
    760
    5k would be ok since a standard 375 rolls off around there anyways. Unless you've got 2441 diaphragms in them 9k is unobtainable.

    you want to wire the tweeter crossover on the input of your 3160.


    I don't know if anyone told you this but the eminence apt tweeter aren't really a super tweeter. In fact there response crashes like a lead brick in water at around 10khz. As for the phase. If the horn has a 2nd order bandpass crossover on it its normal to invert the phase.

    are those c550 back horns? I diyed a pair. I love them. Are you lucky enough to have 150-4c woofers in them? If you do I'm jealous, lol.

    I basically have the same setup as you except I'm running 416-8b woofers and 2445 2" drivers. Plus a altec 802-8d for tweeters. I use an active crossover between the woofers and mids. I use a first order crossover between the mids and tweeters.

    A very cool systems non the less.


    Nick

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. JBL K2 S9500 supertweeter
    By autosky in forum Lansing Product Technical Help
    Replies: 2
    Last Post: 06-27-2013, 07:25 AM
  2. 2407H as supertweeter
    By reVintage in forum Lansing Product DIY Forum
    Replies: 7
    Last Post: 05-05-2011, 05:28 PM
  3. Altec 950-8a SuperTweeter
    By Earl K in forum Lansing Product General Information
    Replies: 8
    Last Post: 02-22-2007, 07:39 AM
  4. Add On Supertweeter For Hartsfield?
    By Tube747 in forum Lansing Product General Information
    Replies: 8
    Last Post: 05-12-2005, 08:02 AM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •