Page 1 of 3 123 LastLast
Results 1 to 15 of 43

Thread: jbl 2243

  1. #1
    gazzamongo
    Guest

    jbl 2243

    what are the theile small parameters....not on jbl pro website.

    don't suppose any of you know if a 2241 or 2242 cone will fit this motor?

    gazza

    http://cgi.ebay.co.uk/ws/eBayISAPI.d...e=STRK:MEWN:IT

  2. #2
    gazzamongo
    Guest

    no-ones heard of a jbl 2243????

    i was hopeful someone on this board would know.

    gazza

  3. #3
    Administrator Mr. Widget's Avatar
    Join Date
    Apr 2003
    Location
    San Francisco
    Posts
    9,720
    Never heard of a 2243HPL. I guess it doesn't matter as "perfect condition other than the voice coil being open circuit" means it is a raw empty frame you are buying. I love these eBay descriptions!

    It looks like a 2242 frame to me. I was going to suggest you ask the seller to take some measurements of the basket depth etc. I see you bought it. When you get the frame measure it and post. I am sure someone with a handy 2242 can measure theirs to confirm.

    The 2242 recone kit is quite reasonable at $169.

    Widget

  4. #4
    gazzamongo
    Guest

    thanks widget (nt)

    .

  5. #5
    RIP 2010 scott fitlin's Avatar
    Join Date
    Apr 2003
    Location
    Brooklyn NY
    Posts
    4,343

    Looks like `42

    But in the pics, it does seem to say 43!

    Never saw this before. maybe they have a different designation for the UK?

  6. #6
    gazzamongo
    Guest

    tis indeed 2243

    im in contact with jbl to find out the theile/small parameters

    this is their initial response (nb the parameters aren't in the link supplied).....

    "Dear Sir,

    The 2243 T/S information can be found on our website www.jblpro.com
    This link takes you directly to the page you need: http://www.jblpro.com/pub/technote/thiele.pdf

    The 2241 is a different driver design and the cones are not interchangeable. The recone you require is a C8R2243 and this should be available via one of the service outlets of Harman Pro UK. Max Lindsay-Johnson (head of division) or Tom Williams (acoustician/technical support) who are cc'd on this email will be able to help you here.

    Thankyou for your enquiry, Best Regards,
    Mark Bailey
    JBL Professional (Europe)"

    i'll post the details when i find out

    cheers

    gazza

  7. #7
    RIP 2010 scott fitlin's Avatar
    Join Date
    Apr 2003
    Location
    Brooklyn NY
    Posts
    4,343

    Re: Re: jbl 2243

    Originally posted by Giskard
    I'll dig them up for you at some point. Maybe in a few weeks.
    There is a JBl 2243HPL? What is the difference between this and a 2242?

  8. #8
    Senior Member Guido's Avatar
    Join Date
    Apr 2003
    Location
    Germany
    Posts
    2,503

    Re: tis indeed 2243

    Originally posted by gazzamongo
    This link takes you directly to the page you need: http://www.jblpro.com/pub/technote/thiele.pdf

    I can't find any info about the 2243 there

  9. #9
    RIP 2010 scott fitlin's Avatar
    Join Date
    Apr 2003
    Location
    Brooklyn NY
    Posts
    4,343

    me neither!

    So what is the difference?

  10. #10
    Senior Moment Member Oldmics's Avatar
    Join Date
    Apr 2003
    Location
    Between Venus and Mars
    Posts
    872

    There is a JBl 2243HPL? What is the difference between this and a 2242?

    C8R2243 is a foam edged cone.

    Sorta like a 2241 and a 2245 crashed into each other.

    Closer to a 2241 which means a 2242 kit will not fit.

    This speaker was used in the Synthesis in 1998.

    All above info was provided from our friends at JBL Pro

    Its a weirdo!

    Oldmics
    Last edited by Oldmics; 10-22-2004 at 02:51 PM.

  11. #11
    gazzamongo
    Guest

    asked jbl

    asked jbl to provide theile small and more info about 2243.

    when they respond i will post the results

    p.s anyone horn loaded a 2242 with good results?

    (know bruce edgar uses 2241 in seismic hornsub)

    cheers

    gazza

  12. #12
    gazzamongo
    Guest

    hi oldmics

    do you have any info about the parameters of this driver?

    is the 2243 foam edge cone my only option to re-cone this driver?

    tia

    gazzer

  13. #13
    Senior Moment Member Oldmics's Avatar
    Join Date
    Apr 2003
    Location
    Between Venus and Mars
    Posts
    872
    Sorry no other info.

    If I were in your shoes,I would take the frame to a service center and see if a 2241 kit fits into the motor assembly.

    Of course the correct way is to use the C8R2243 cone kit and restore it to original specs.

    Oldmics

  14. #14
    Obsolete
    Join Date
    Apr 2003
    Location
    NLA
    Posts
    12,193

    JBL 2243H

    The 2243H uses the 2242H basket and has a foam surround.

    Fs = 30 Hz
    Qms = 5
    Vas = 338.1 liters
    Cms = 0.155 mm/N
    Mms = 0.182 kg
    Rms = 6.854 mohms
    Xmax = 5 mm
    Xmech = 10 mm
    P-Dia = 397.4 mm
    Sd = 0.124 sq.m
    P-Vd = 620.1 cu.cm
    Qes = 0.2
    Re = 5.2 ohms
    Le = 1.4 mH
    Z = 6.24 ohms
    BL = 30.2 N/A
    Pe = 700 watts
    Qts = 0.19
    no = 4.401 %
    1-W SPL = 98.58 dB
    2.83-V SPL = 100.5 dB

  15. #15
    Senior Member Guido's Avatar
    Join Date
    Apr 2003
    Location
    Germany
    Posts
    2,503
    WOW

    How could we miss this driver?
    It's a monster!

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. L100 and 43XX Monitor Legacy
    By Don McRitchie in forum Lansing Product General Information
    Replies: 8
    Last Post: 05-22-2012, 08:09 AM
  2. Mobile JBL almost ready...
    By johnaec in forum General Audio Discussion
    Replies: 5
    Last Post: 08-01-2004, 11:21 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •