Results 1 to 5 of 5

Thread: Bolt circle / horn mounting holes diameter

  1. #1
    Senior Member jerv's Avatar
    Join Date
    May 2006
    Location
    Norway
    Posts
    185

    Bolt circle / horn mounting holes diameter

    I know the old (2446 and before) drivers: they have 4 mounting screws on 101,6 mm bolt circle.

    But on the newer ones, the spec sheets are confusing.

    Do anyone know the bolt circle diameter for the
    2450
    2450SL
    2451
    2452 ?

    Just trying to figure out which horns fit what driver.

    Best,
    Espen

  2. #2
    Senior Member DogBox's Avatar
    Join Date
    Aug 2012
    Location
    NSW, Australia
    Posts
    191
    A quick 'Google' on each of these reveals that the 2450 is a 50mm 2" diameter throat Compression Driver fitting 2380 Series & 2360 with adapt.'s..

    I think [as in don't quote me] the SL model sported a coated diaphragm but same motor...

    The 2451 is a 38mm 1 1/2" dia. throat on 114mm bolt diameter fitting the 2350 Series Horns

    And the 2452 was a 1 1/2" dia. throat with a 3 1/4" (3.250") 82.55mm dia. bolt mount, used in the VRX Series - Line Array speakers...

    Usually a Google search and look for the [PDF] Specification Sheet or Technical Manual will reveal lots. Look at the Response Curves and what they are using to get these curves. Either the 1" testing tube which will 'equate to' or on an actual horn. Check them out!



    DogBox

  3. #3
    RE: Member when? subwoof's Avatar
    Join Date
    Aug 2003
    Location
    fingerlakes region, NY
    Posts
    1,899

    wait for it.

    Am posting a group picture tonight showing ALL of these models and variations for reference.

    Some of the above post is incorrect / incomplete..

    sub

  4. #4
    Senior Member ivica's Avatar
    Join Date
    Jan 2008
    Location
    serbia
    Posts
    1,703
    Quote Originally Posted by jerv View Post
    I know the old (2446 and before) drivers: they have 4 mounting screws on 101,6 mm bolt circle.

    But on the newer ones, the spec sheets are confusing.

    Do anyone know the bolt circle diameter for the
    2450
    2450SL
    2451
    2452 ?

    Just trying to figure out which horns fit what driver.

    Best,
    Espen

    2450 [~2" diameter throat= 49mm ] => bolt diam. 4" == 101.6 mm
    2450SL [~1.5" diameter throat= 38mm ] => bolt diam. 3 1/4" (3.250")== 82.55 mm
    2451 [~1.5" diameter throat= 38mm ] => bolt diam. 4 1/2" (4.50") == 114.3 mm
    2452 [~1.5" diameter throat= 38mm ] => bolt diam. 3 1/4" (3.250")== 82.55 mm

    regards
    ivica

  5. #5
    Senior Member jerv's Avatar
    Join Date
    May 2006
    Location
    Norway
    Posts
    185
    Thanks, guys.

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. bolt circle diameter for JBL 2435 HPL
    By low pitch in forum Lansing Product Technical Help
    Replies: 2
    Last Post: 06-28-2010, 07:28 AM
  2. 802 driver mounting bolt
    By Zuben in forum Lansing Product Technical Help
    Replies: 3
    Last Post: 11-25-2009, 11:09 PM
  3. Flush mounting a square circle driver?
    By stevem in forum Lansing Product DIY Forum
    Replies: 6
    Last Post: 02-04-2009, 07:49 PM
  4. Horn Mounting
    By lpd in forum Lansing Product Technical Help
    Replies: 0
    Last Post: 02-10-2006, 07:21 PM
  5. Mounting Holes and Gaskets for 2206H
    By John Y. in forum Lansing Product Technical Help
    Replies: 1
    Last Post: 05-25-2005, 03:03 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •