How does one remove the x-over in the L100? The 4th screw is covered by the foil. My foils are in good condition.
How does one remove the x-over in the L100? The 4th screw is covered by the foil. My foils are in good condition.
had L25,L36,L40,L120,L300,AquariusIV(2),S1,4408 have L65,L100,L222,DorianS12,B380
Heat up the foilcals and carefully remove them. Use a heat gun or hair dryer.
Be VERY patient. Do not think you can re-flatten a foilcal that get's inadvertently bent. Almost impossible, and even if you get close, you'll forever know it's not. Even on an L100...
bo
"Indeed, not!!"
All I can think of is that, at the time, it must have seemed like shear brilliance to cover mounting screws with foilcals...
And more-so, to have the mounting screws come in from the front of the baffle. Stroke of genius. Then, let's hide the L-pad way up in the corner, furthest from the woofer hole, and behind the duct so that is impossible to do anything without removing it. Doh!
bo
"Indeed, not!!"
"Number One, I order you to take a number two."
There are currently 1 users browsing this thread. (0 members and 1 guests)