Since we are having so much success with my Haflers, i thought I would take a look at my Soundcraftsmen PCR800. It seems to be doing the same thing so I checked the volt on the two caps in there. One reads 87VDC, 0VAC. The other reads 57VDC, 26VAC. I Also checked the DC voltage as I shut off the power switch. On the good one it reads high 80s and then starts dropping. The bad one goes instantly to 0 volts as soon as the switch is turned off. Looks like a bad cap to me. Now I pulled the caps and they are 11,000MFD 75V 85C. I can't seem to find 11000MFS. Do you think 10000 wil work OK? The next step up seems to be 18000 and those cans will not fit in the spot these go.