.
Posh M2 Speakers & JBL Control Sub-1 - $100
http://portland.craigslist.org/mlt/ele/4807658502.html
M2's are smaller than I thot
.
Posh M2 Speakers & JBL Control Sub-1 - $100
http://portland.craigslist.org/mlt/ele/4807658502.html
Humm, so they do need a sub finally
and the price is almost in CarClubAmerica's rangeOriginally Posted by pos
Humm, so they do need a sub finally
Almost . . . !and the price is almost in CarClubAmerica's range
". . . as you have no doubt noticed, no one told the 4345 that it can't work correctly so it does anyway."—Greg Timbers
Merry Christmas to all and I hope everyone gets a couple of M2's in their stocking.
XPL 200's w DX1, XPL 160's, XPL 140's, L7's, L5's, L3's, L1's Homemade L Center, 4412's, 4406, L60T's, L20T's
Great price, but I could never find room for such huge speakers
Merry Christmas, everybody!
Francis
Oppo BDP-95 DCX-2496 RMX-850 Parasound A21 First Watt J2 Dayton RSS390HF-4 MTM Quads of SEAS W18E001 511Bs TAD TD-2002
Hi,
Have you seen this? Pretty interesting.
Both voice coils in series, 2 x 10 ohms = 20 ohms
https://www.youtube.com/watch?v=jDTLZCNzhFQ
All the best
//RoB
The solution to the problem changes the problem.
-And always remember that all of your equipment was made by the lowest bidder
Thanks, great video with an overview of the internal bracing!
Good thing he did not detach the D2 binding posts.
kw55 is an official JBL importer and the only place I know in France where one can listen to the M2.
He is not too far from the German and Belgium borders either...
https://maps.google.fr/maps?q=7,+rue...C3%A9e&t=m&z=7
Why?
because of this: http://www.audioheritage.org/vbullet...l=1#post364302
2451J Ti
The solution to the problem changes the problem.
-And always remember that all of your equipment was made by the lowest bidder
Hi sebackman,
Nice to see the "missing" part.
All the Best,
Regards
Ivica
Here is how a 2451Be (Truextent) looks like on the new JBL M2 waveguide. No correction, 1/24 smoothing, short window 4ms
Happy Easter
//RoB
The solution to the problem changes the problem.
-And always remember that all of your equipment was made by the lowest bidder
Magnitude AND phase!!! Thank you! Enough information to know what is equalizable and what is not and that is a very usable horn driver combination!
Many thanks.
Barry.
If we knew what the hell we were doing, we wouldn't call it research would we.
Here is what a 30°/10° averaged measurement of a D2430K should look like on a M2 horn without any filter engaged:
(obtain by inversion of the active and passive correction, and with a LR36 800Hz target):
And for the sake of comparison, here is what I got when comparing a 2450SL-Be (should be identical to sebackman's 2451Be) and a D2430K on a PT waveguide:
There are currently 3 users browsing this thread. (0 members and 3 guests)
Posting Permissions
Reply With Quote