JBL Master Reference Monitor

[JuniorJBL]

Try the 402 first before you buy, I had the 402 and 500 and noticed the 402 has a very laid back sound and the bass lacks slam compared with the MC500. Sold the 402 and still looking for a second 500.

It would only be used on the top as I have 600 mac watts per already!!

[Dave_72]

It would only be used on the top as I have 600 mac watts per already!!

It might roll off the highs though.

[JuniorJBL]

It might roll off the highs though.

So like 37-38K instead of 40?

[Dave_72]

So like 37-38K instead of 40?

Perhaps. I was thinking down to 20Khz. Still respectable.

[Valentin]

the word is out that abailability will be till mid april at least for Mexico

I had an instalation just right for them but i think the client will not wait till mid april or may

Doese any one now difrent time line


For a piar for me its no problem but for the client there is some time isues

[JuniorJBL]

the word is out that abailability will be till mid april at least for Mexico

I had an instalation just right for them but i think the client will not wait till mid april or may

Doese any one now difrent time line


For a piar for me its no problem but for the client there is some time isues

I just called JBL. Call your local rep.

[Valentin]

i will try it again again

[macaroonie]

So , its March now , anyone seen or heard of these bad boys being shipped ?? Any end user feedback yet ?

[4313B]

Um, I'm pretty sure March means March 2014

[sebackman]

Hi,

Has anybody seen anything about what DSP settings they are using or potentially a file for the BSS Soundweb units?

It would be intresting to see how much and what type of correction they apply and if they are using IIR or FIR filters in the BSS units.

The curve they posted is almost unreal.

All the best
//RoB

[CONVERGENCE]

Here at NAMM.

http://www.youtube.com/watch?v=dHuBu...layer_embedded

[Valentin]

Hi,

Has anybody seen anything about what DSP settings they are using or potentially a file for the BSS Soundweb units?

It would be intresting to see how much and what type of correction they apply and if they are using IIR or FIR filters in the BSS units.

The curve they posted is almost unreal.

All the best
//RoB

oh it is real,
I think that the design by it self (drivers, horn, box tunning xo setting) is topnotch and eq filters are the cherry and cream

[ngccglp]

It would only be used on the top as I have 600 mac watts per already!!

That's exactly my configuration for biamping my 4350A. 402 on top and 500 bass. Do report back your experience

[JuniorJBL]

Right now im playing with a Levinson #29 on the tops of my arrays. It's pretty nice even at 50 watts per.

[Dave_72]

Right now im playing with a Levinson #29 on the tops of my arrays. It's pretty nice even at 50 watts per.

Some prefer the older Levinson. I used to have the No. 23 amp. I didn't care for it too much. It sounded kinda dead to me. I had to use a lot of EQ to perk it up.