As a suggestion it might be worthwhile prefacing your new thread (should you decide to do so) with M2 Build: 'x' 's . It would make it easier to find them all later on a thread search.
As a suggestion it might be worthwhile prefacing your new thread (should you decide to do so) with M2 Build: 'x' 's . It would make it easier to find them all later on a thread search.
No
I am getting my 4338 clones set up at the moment as well as working on some 4345's. Sorry
Guys
just whanted to let you know that JBL has released new XO tuneings for the crown DCI "N" series amps
That means the price of a M2 system has radically changed
i have been using DCI N AMPS with the 7 series ( 708 and 705 ) and sound great
You should be able to pick up the 4-channel for something like three grand, so basically a 3/4 reduction in amp cost.
http://www.audiopro.de/live/crown_53803_DEU_AP.html - Crown DCi 4 300N: 2.955,— €
el goregrind es cultura
YEP
if you can manage with 106 +- dB at normal home listening distance of excellent top quality sound this is probably steal at 14000us for a new system
something i notice is their are two Low Frequency tuneings one has a 27Hz High Pass (recommended ) and one with no hi pass
i did not know of this possibility till now
Hey Valentín,
any chance of you re-measuring the ports on the M2 and getting more exact measurements?
Hallo!
I have downloaded this new tunings for the M2 into my Crown DCi. But, why is it lockt? You can't see the settings. Is there any particular reason for this. It is even lockt for the Cinema Screen Arrays settings, I could see this settings before without any problem.
Can you see the settings for your 7 series?
Have tried many differen't options.
You are right, Great amp
I noticed the same thing. But 4313B helped us out in some other posts here.
http://www.audioheritage.org/vbullet...l=1#post378081
It's not the file for your amp. But you can load the file in London Architect and see the settings, write them down, and copy them for a new file created from scratch for your DCi. All of the settings are also shown in some older posts in this thread.
There are currently 1 users browsing this thread. (0 members and 1 guests)