Results 1 to 8 of 8

Thread: XPL200 stands

  1. #1
    Senior Member
    Join Date
    Dec 2009
    Location
    sheboygan, wi
    Posts
    116

    XPL200 stands

    Hello,
    I am hoping someone is willing to help me out with finding some information. I have been trying to find a set of factory stands for the XPL200 (stand part #MTX200) but have not had much luck. They are very hard to find not already married to a set of speakers, and no ever wants to separate them.
    With that said, I do have the ability to fabricate a set that would be very similar to the factory ones. I would likely change the way they are assembled, but from an aesthetics standpoint, I could make them very similar (except for the JBL logo on the front).
    However, I have no dimensions and only a few pictures I’ve downloaded from this site on them. If I could get a few crucial dimensions, a couple pictures, and perhaps a tracing of the top and bottom plate (so I could accurately duplicate the radiuses and angles), I would be able to make a set that at first glance would look like the originals. An engineering print would be even better….but I won’t hold my breath.
    Let me know if anyone is interested in helping me out. I know it’s a lot to ask, but I figured I’d give it a shot.
    Brett

  2. #2
    Senior Member
    Join Date
    Dec 2009
    Location
    sheboygan, wi
    Posts
    116

    ttt

    looks like I'm going to strike out on this....

  3. #3
    Senior Member gferrell's Avatar
    Join Date
    Jan 2010
    Location
    Styx , NC
    Posts
    479
    I would help but all I have are XPL 160 stands
    Attached Images Attached Images  
    XPL 200's w DX1, XPL 160's, XPL 140's, L7's, L5's, L3's, L1's Homemade L Center, 4412's, 4406, L60T's, L20T's

  4. #4
    Senior Member pasadena's Avatar
    Join Date
    Apr 2003
    Location
    Australia
    Posts
    217

    XPL 200 Stand Part 1

    Name:  DSC_4883.jpg
Views: 1577
Size:  43.4 KBName:  DSC_4879.jpg
Views: 1712
Size:  66.6 KBName:  DSC_4887.jpg
Views: 1790
Size:  35.9 KBName:  DSC_4888.jpg
Views: 1526
Size:  40.9 KB
    Attached Images Attached Images  

  5. #5
    Senior Member pasadena's Avatar
    Join Date
    Apr 2003
    Location
    Australia
    Posts
    217

    XPL 200 Stand Part 2

    Name:  DSC_4895.jpg
Views: 1582
Size:  39.8 KBName:  DSC_4897.jpg
Views: 1499
Size:  28.7 KBName:  DSC_4898.jpg
Views: 1510
Size:  41.4 KB
    Attached Images Attached Images  

  6. #6
    Senior Member pasadena's Avatar
    Join Date
    Apr 2003
    Location
    Australia
    Posts
    217

    XPL 200 Stand Part 3

    Name:  DSC_5008.jpg
Views: 1563
Size:  49.3 KB
    Attached Images Attached Images  

  7. #7
    Senior Member pasadena's Avatar
    Join Date
    Apr 2003
    Location
    Australia
    Posts
    217
    This is the best I can do without providing dimensions, apart from dissembling the stands, there's not much I can do. I can try and run a ruler around the stands as they sit.

    Cheers

  8. #8
    Senior Member
    Join Date
    Dec 2009
    Location
    sheboygan, wi
    Posts
    116

    Thank you!

    That is quite helpful. Would it be possible to get a few dimensions? i've marked up your pictures with what I'm looking for.

    Would it be possible to get a picture directly from the side as well?

    i appreciate your help, If I can get these dimensions, I think I should be able to fill in the blanks, to make them very similar to stock, if you can provide these dimensions.

    Thank you so much,
    Brett
    Attached Images Attached Images   

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. XPL200
    By Techbot in forum System Information
    Replies: 1
    Last Post: 05-10-2006, 03:00 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •