Results 1 to 3 of 3

Thread: How to spot a sunk cone

  1. #1
    RE: Member when? subwoof's Avatar
    Join Date
    Aug 2003
    Location
    fingerlakes region, NY
    Posts
    1,898

    How to spot a sunk cone

    Here's a JBL 2206H that is on ebay for an attractive price - and here's the reason.

    http://cgi.ebay.com/ws/eBayISAPI.dll...m=121019584715

    (A) The gasket has been compressed flat to the frame. It should extend at least 1/8 past. It takes a LOT of pressure to do this - NOT just by "setting it down on a shelf"

    (B) The 3 roll surrounds outer roll was flattened also by some means - most probably by one of those infamous bug-eye grills they sell in the music stores and (sigh) JBL did use on some of their concert series monitors. You can tell because the mounting holes are not perforated and there are no clamp marks on the gasket. Those bug grills have an inside diameter that is too small and WILL interfere with the surrounds on pro series JBL's.

    (C) The surround rolls should be level - they are actually tapered inward (down ) meaning that a long-term mechanical issue forced the cone down. this is not recoverable alas. This can be seen also by looking at the spider from the side but the sellers pictures don't show this very well.

    sub
    Attached Images Attached Images  

  2. #2
    Senior Member DogBox's Avatar
    Join Date
    Aug 2012
    Location
    NSW, Australia
    Posts
    191

    ..more than old age...

    Hi Subwoof,

    I've got some weird scenarios going through my head as to how this "might" happen, but.. What causes a cone to 'sag' like this? would
    it 'sag outward' if you hung it up by its magnet? That spider must really be stretched beyond its 'spring'...?

    DogBox

  3. #3
    RE: Member when? subwoof's Avatar
    Join Date
    Aug 2003
    Location
    fingerlakes region, NY
    Posts
    1,898

    sagging body parts

    this type cone will NEVER sag no matter WHAT the usage, storage or age.

    the sunk cone was caused by a long-term external mechanical influence, period.

    Somebody screwed up when assembling the cabinets...a LONG time ago.

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. Musical sweet spot for 3D sound
    By JBL 4645 in forum General Audio Discussion
    Replies: 0
    Last Post: 03-21-2011, 04:13 AM
  2. Have a hot spot around 250 hz on my diy 4430's
    By crtstudios76 in forum Lansing Product DIY Forum
    Replies: 15
    Last Post: 10-04-2009, 05:22 PM
  3. Repairing weak spot in 2242hpl cone
    By KenWH in forum Lansing Product Technical Help
    Replies: 11
    Last Post: 06-30-2006, 11:08 AM
  4. Newbie - 4312 Sweet Spot question.
    By lutesk in forum Lansing Product General Information
    Replies: 16
    Last Post: 07-13-2005, 03:42 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •