Need help to rebuild DX-1 for K2 S9500

[Dieter]

Hello,
I respectively a friend of mine want to rebuild a DX-1 for my K2 S9500.

We have found this schematic of the DX-1 (see attachment).

Also we find the values for the S9500 cards:


and an image of the cards:

Now we have two problems.
We can not find the resistors / capacitors R107, R108 and C114 and 115 in the JBL DX-1 schematic. The simulated frequency response curve is inconsistent with the values of the resistors / capacitors.

Can anyone help, please.

Best regards
Dieter

[Ruediger]

...
The simulated frequency response curve is inconsistent with the values of the resistors / capacitors.
...

*What* did You simulate?

Ruediger

[4313B]

We can not find the resistors / capacitors R107, R108 and C114 and 115 in the JBL DX-1 schematic. The simulated frequency response curve is inconsistent with the values of the resistors / capacitors.

The DX-1 was originally designed for the XPL-200 hence the schematic probably shows the XPL-200 card.

Greg later expanded the utility of the DX-1 to several other systems, including the Everest II, by building different card sets.

[Dieter]

Hello Ruediger,

he simulated "voltage vs. frequenzy".

That is the aim:


For LF it is ok, but for HF the curve is very false.(I don't have this curve, he is in holidays a few days.)

Mein Englisch ist leider nicht so gut (only school). Aber Du kannst mir auch eine Mail schicken!

Das Problem ist, dass auf dem DX-1 Schema die o.g. "Steckplätze" nicht eingezeichnet sind und/oder kein Schaltplan für die oben gezeigte Karte für die K2 zu finden ist.

Best Regards
Dieter

[Dieter]

The DX-1 was originally designed for the XPL-200 hence the schematic probably shows the XPL-200 card. Greg later expanded the DX-1 use to several other systems, including the Everest II, by building different card sets.

Hello 4313b,

is there any solution for my problem ?
best regards
Dieter

[4313B]

You need the schematic for the S9500 cards...

[Dieter]

You need the schematic for the S9500 cards...

Ok, but where i can get it?

Help please.

Dieter

[4313B]

Pasadena and I both posted all the card schematics over the years and I think there are numerous threads to that effect. If you can't find them I'll have to pull them off another computer that is no longer in service and it will take me a few days to pull that hard drive. You might try searching for M9500, I believe it used the same DX-1 card style as the S9500. Use Google for your searches of this site.

[Dieter]

Pasadena and I both posted all the card schematics over the years and I think there are numerous threads to that effect. If you can't find them I'll have to pull them off another computer that is no longer in service and it will take me a few days to pull that hard drive. You might try searching for M9500, I believe it used the same DX-1 card style as the S9500. Use Google for your searches of this site.

hello,

are these the right ones

s???

[hjames]

After a google search for DX-1, I found this thread - http://www.audioheritage.org/vbullet...Crossover-kits

Robh3606 posted the full DX-1 schematic there - at this link http://www.audioheritage.org/vbullet...9&d=1061218205


Pasadena's thread is here - http://www.audioheritage.org/vbullet...t-Output-Cards

with the brochure, even ...

[Dieter]

Thank you very much hjames,

i have this schematic, but in there are not the resistors / capacitors R107, R108 and C114 and 115, we are looking for.

Best regards Dieter

After a google search for DX-1, I found this thread - http://www.audioheritage.org/vbullet...Crossover-kits

Robh3606 posted the full DX-1 schematic there - at this link http://www.audioheritage.org/vbullet...9&d=1061218205


Pasadena's thread is here - http://www.audioheritage.org/vbullet...t-Output-Cards

with the brochure, even ...

[4313B]

are these the right ones

They look like the right ones.

[Dieter]

They look like the right ones.

Thank you!

My friend will try it, when he is back from holidays!

If something wrong, i will ask.

Best regards Dieter

[Robh3606]

If i am not mistaken the extra parts are becasue the version shown is Charge Coupled taking the + voltage off the power supply.

Rob

[Dieter]

If i am not mistaken the extra parts are becasue the version shown is Charge Coupled taking the + voltage off the power supply.

Rob

Hello Rob,

i don't understand this.

Could you explain please.

What do we have to do or what do we have to care or intend?

Best regards

Dieter