Re applying Folical Badges

[Audiobeer]

I've removed the folical badges off of my studio monitors and was wondering if someone here had a good method for reapplying them. I cleaned the excess adhesive the best I could off the back.

[subwoof]

contact cement works well - let it dry a full 10 min before sticking it on. a little goes a LONG way.

*wait*

where are these located and what model???

[Audiobeer]

They are 4313B's and they are right on the face in the front. Any specific brand of contact cement? Thanks Sub!

[subwoof]

if on the baffle proper, weldwood from home depot works fine. use just a LITTLE.

[Audiobeer]

if on the baffle proper, weldwood from home depot works fine. use just a LITTLE.

I found some Weldwood contact cement. Thanks Sub. Will give this a shot!

[subwoof]

use CONTACT CEMENT....

The manufacturer I see the most often is DAP / weldwood.

[Audiobeer]

Thanks Sub. Just got back and put a coat on.