.
I recently bought some 250Ti's that need refoaming ....purchased the Rick Cobb kit..
removed old foam and cleaned up basket and cone pretty well after removing the black plastic ring.
so I test fitted the foam ring ...its pretty tight against the basket channel , but there is maybe 1/32
gap between surround and cone.
I've always glued the surround to the cone FIRST and did centering adjustments on the next glueing to the frame ...this does not appear possible here ...I PMed a forum member who has done some of these and uses
OC rings , he does them in the same order that I've traditionally done the smaller ones.
to do THIS one correctly, should I be glueing to the basket frame FIRST and then centering on the step of
attaching the cone ?
I realize that as long as it works correctly, the order is less important, but I'd like to get forum advice before starting on an expensive driver..
thx.