Results 1 to 5 of 5

Thread: British Resistor Code

  1. #1
    Senior Member
    Join Date
    May 2009
    Location
    California
    Posts
    1,587

    British Resistor Code

    Working on an old pair of Monitor Audio boxes for a friend


    Fried resistor for the tweeter


    I have determined that it is a 3.3ohm resister but am not certain as to the wattage rating


    The part is marked:


    EGR
    74ER
    3R3 (which is the ohms value, 3.3)
    5%


    Guessing from the looks of it, I'd say around 3 watts, but I don't know and can't find the code on-line

    Any help with this would be greatly appreciated!


    Thank you


    Thomas

  2. #2
    Senior Member
    Join Date
    May 2007
    Location
    Ingolstadt in Germany
    Posts
    456

    There is no code for the wattage

    Buy a resistor which is physically larger (thicker), then You are on the safe side.

    How could You manage to fry it?

    Ruediger

  3. #3
    Senior Member
    Join Date
    May 2009
    Location
    California
    Posts
    1,587
    Quote Originally Posted by Ruediger View Post
    Buy a resistor which is physically larger (thicker), then You are on the safe side.

    How could You manage to fry it?

    Ruediger

    No idea, but I would suspect clipping, being over driven or an amp in poor health, all common in those wacky '70s!

    The friend I am assisting received them this way. The resistor saved the tweeter.

    While looking for the British code, I found another thread elsewhere, a guy with the same questions regarding the same speaker.

    It may have been a common problem with this model.

    I couldn't tell you.

    Thomas

  4. #4
    Member
    Join Date
    Apr 2010
    Location
    North of NYC
    Posts
    48
    Quote Originally Posted by Wagner View Post
    The resistor saved the tweeter.
    if so, might think about not giving any headroom and let that resistor act as a fuse for protection. Something to consider.
    Control 25AV on the deck - L1 - L20t & L80t in piano black - 4312A - 4430

  5. #5
    Senior Member
    Join Date
    May 2009
    Location
    California
    Posts
    1,587
    Well, the scorched resistor replaced, still no signal to the tweeter although there is continuity on the circuit?

    Once off the board and out of the circuit, the resistor still measured correct value, so the heating has taken out something else as well.......

    ............burned a nice black spot on a glass board

    The tweeter is good.

    Spent the afternoon researching obsolete British Standard COLOR coding for capacitors, think I know what I need there, but would like confirmation before I start lifting pieces

    Research also indicates that these speakers had issues with overheating networks, but of course no details

    Does anyone have, or know where I can find a network schematic with values for this old model

    Monitor Audio MA5

    Thank you,
    Thomas

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. Need a resistor value for the JBL N250Ti crossover
    By Zonker92 in forum Lansing Product DIY Forum
    Replies: 3
    Last Post: 07-21-2011, 02:33 PM
  2. LX10 resistor question
    By jimbofish in forum Lansing Product Technical Help
    Replies: 5
    Last Post: 07-20-2011, 08:52 PM
  3. Resistor signatures
    By Ken Pachkowsky in forum Lansing Product Technical Help
    Replies: 11
    Last Post: 01-08-2006, 04:05 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •