Does anyone have any good choices for one? I am looking to expand into vinyl but my Marantz SC7S2 does not have this option.
Thanks!
Does anyone have any good choices for one? I am looking to expand into vinyl but my Marantz SC7S2 does not have this option.
Thanks!
That is a pretty open ended question. Can you narrow it down somewhat?
Tube or solid-state?
Moving coil or moving magnet?
For what cartridge, arm and table?
Budget?
Sorry. I guess I am not quite sure yet. Actually, I am trying to get back to the vinyl from my college years-for now. I have an old Technics model (?) table to use. Since my preamp does not have a phono section, I am looking for a decent one for perhaps both MC, MM. Since I still have a bunch of albums, it would be cool to listen to them again.
To be honest, I have not followed any of the upgrades with turntable technology so I am afraid I am very ignorant in this area. In College, the Technics with a Sansui G-8000 receiver, ADC eq. and HH Scott speakers were all I needed.
Thanks for any advice.
The thing is, there are a number of outboard phono preamps that cost ~$200 or less that are every bit as good as your old Sansui days, but since you've gone way past that with your current system, it might make sense to upgrade the lot. A quality turntable and a nice moving coil cartridge will set you back a couple of grand at least. An excellent phono pre from Parasound is the JC-3 however it also costs a bit above $2K.
So you can buy an inexpensive phono pre on line and listen to what you have or you can bring up the playback chain to be in keeping with your current system, but you'll be spending some real money.
Widget
Somehow I knew that would be the case. You are correct. I think I need to invest $ if I want to be serious about this. However, there is a point of diminshing returns. To me-just me-I am there with the system I have at the moment but I do want to explore the vinyl option.
When I started my quest, I was buying stuff that some of my friends had/sold and sounded okay. Slowly buying and selling, I am comforable with what I have at this time. I suppose vinyl is the next logical progression. Perhaps some would say vinyl should have taken a front seat to digital????
You could check out used at Audiogon before buying, ask questions from the seller, buy and listen & resell if motivated to move up down or sideways.. I've done that before ..
For Me, this project has been put on hold while I am hitting tax season hard. This year marked our companies 25th year in business(my wife & I started it). We are getting a significant increase in clients. It is great, but puts a damper on other activities until 4/17/12 (for Maine). Then, of course, are the non-profit Form 990's due 5/15/12. Then there are the...........it goes on, but calms down so we are only working a normal schedule.
Thank you for the suggestions. Keep them coming. As I indicated, I am not schooled in this area since the early eighties.
Careful man, there's a beverage here!
I have gone into vinyl with both feet (and wallet) of late and I now have direct experience with several models that have been discussed here. First up is the ProJect Tube Box II SE (and I owned the non-SE for a year beforehand). These are excellent sounding units with a good subsonic filter and loading options (SE) should you get a more exotic moving coil at some point. You can roll tubes in these and change the sound a lot of different ways. Hard to go wrong here especially if you start used. Mine is currently being fed from my VPI Classic/AT OC9 combo and it sounds sublime.
On the other side of my rack is my old faithful Yamaha PX2 which now sports a TOTL Denon DL-S1 going into a Pass Labs Xono. The DL-S1 is a .15mv cart and really needs a lot it gain to be heard. The combination has raised the bar high for vinyl and easily keeps pace - if not besting - the VPI. The Xono is a quality instrument on a level all its own in my system. Try finding another preamp with as many loading options or as much gain...not much out there.
The VPI setup holds the edge in imaging (helped by the tubes no doubt) and gets used for jazz a lot.
The Px2 has bass that gives the CD player envy and brings out details at an electron microscope level. It rocks hard.
Drop me a line if you are ever down my way Tom....you could hear a lot of combinations in a few hours...
Jblnut
There are currently 1 users browsing this thread. (0 members and 1 guests)