Zilch (RIP) had mini-Econowaves with these drivers, but I can't find much about them other than in the Econowave threads. Was looking for something like a 2118 in the midrange, has the snap of the 2118, but could go a little deeper.
Zilch (RIP) had mini-Econowaves with these drivers, but I can't find much about them other than in the Econowave threads. Was looking for something like a 2118 in the midrange, has the snap of the 2118, but could go a little deeper.
Based on the AC28/95 box, a pair should be good to 60Hz (-3dB).
I have a pair of the J-version and was conversing with Zilch about
center channel use (sideways MTM) but when he passed, so did my
zest for working on it. If I build it up, I'll post here. Seems like a
good driver hiding in a stamped frame shell.
Yeah the motor is as state of the art as they come...lots of motor and lil lower Fs. Looks great on paper.
Grumpy, you wouldn't have any physical measurements of the drivers would you? Something like depth and diameter of the motor would be VERY helpful.
4.25" deep overall, just over 4" from back of front flange to back of magnet.
Largest part of magnet diameter is 6.25"
There are currently 1 users browsing this thread. (0 members and 1 guests)