An Intriguing Recommendation Ivica !
The
Schottky diode (in some respects ) is superior to the standard silicon-junction based types ( ie; most importantly in voltage drop & recovery speed ) .
Unfortunately, it's specs are inferior in the following areas ( the reverse leakage current spec might be the deal breaker for me ) ;
- Apparently I'm one of the few ( on this forum anyways ) that can hear the deleterious effects caused by the battery within the bias circuit ( it drove me nuts I must say / sounding like someone had lightly touched the diaphragm with a "phantom finger" ) . I ended up disconnecting the battery after the caps where fully "formed" ( & then would let the caps slowly float/deflate as the AC beat up on the DC, before eventually rebiasing ) .
- I'll need to try both ( types of diodes ) to see if there's an apparent sonic difference .
Thanks for the suggestion !