Results 1 to 3 of 3

Thread: Mounting screw for compression driver 802

  1. #1
    Junior Member
    Join Date
    Apr 2021
    Location
    Berlin, Germany
    Posts
    13

    Mounting screw for compression driver 802

    G´Day I purchased some Altec horn drivers - they are 802-8D and came without the mounting screws attached to the driver. Now i need to screw the horn on to the driver but am i too stupid to choose the correct one. Normally, these screws seems to come out of the driver and then the horn connects to it and gets tighten with a nut screw. But hell, which one do I need and how do i get these in there? Sorry if thats too obvious but i can´t see how you do it Best Hannes

  2. #2
    Senior Member grumpy's Avatar
    Join Date
    Oct 2003
    Location
    SoCal
    Posts
    5,742
    There's this:

    https://audiokarma.org/forums/index....0/post-6304770

    Hope you figure it out

  3. #3
    Junior Member
    Join Date
    Apr 2021
    Location
    Berlin, Germany
    Posts
    13

    Red face

    Quote Originally Posted by grumpy View Post
    There's this: https://audiokarma.org/forums/index....0/post-6304770 Hope you figure it out
    thanks a lot!

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. 802 driver mounting bolt
    By Zuben in forum Lansing Product Technical Help
    Replies: 3
    Last Post: 11-25-2009, 11:09 PM
  2. Altec driver mounting studs
    By Al Klappenberge in forum Lansing Product Technical Help
    Replies: 5
    Last Post: 02-28-2005, 11:16 AM
  3. Mounting a Two Inch Driver
    By Chas in forum Lansing Product Technical Help
    Replies: 5
    Last Post: 06-08-2004, 08:43 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •