Results 1 to 15 of 44

Thread: High SPL Design Ideas

Hybrid View

Previous Post Previous Post   Next Post Next Post
  1. #1
    Junior Member
    Join Date
    Jun 2010
    Location
    Cincinnati, OH
    Posts
    18

    High SPL Design Ideas

    Greetings!

    I'm a long time JBL fan and I'm in the process of designing a new system for a 50' x 30' room in our barn where we hold several large parties per year.

    I currently have (2) 2446H drivers and am planning to order (2) 2242H 18" drivers shortly. I also have two JBL 5235 electronic crossovers and several amplifier choices (multiple Crown MA600, PS-400 and Ashly FTX-2001 units) available to build a tri-amplified system.

    Space is not a problem and the ceiling is open to the roof structure - about 24' high. The horns and mid bass drivers will likely be suspended on a back wall with the subs on the floor.

    Here are my questions:

    Which 12" or 15" JBL driver (possibly 2 per cabinet) would be my best choice for optimal mid range and mid bass performance and efficency to complement the 2446H?

    Which horn should I look for to mount the 2446H and at what crossover frequency and slope?

    I'm thinking about building sub cabinets similar to the 4645C. Is this the optimal bass reflex cabinet design for the 2242H for the deepest, flatest response? Where would you cross it over to match the above?

    I will likely buy used, late model parts to complete this system.

    Sorry for the long post... I'm really looking forward to this project and would appreciate some advice and ideas from the forum.

    Thanks in advance for the help!

    Mike

  2. #2
    Senior Member louped garouv's Avatar
    Join Date
    Jun 2004
    Location
    formerly "the city where imagination takes precedence over fact"
    Posts
    2,152
    how many folks generally gather for these events?

    and is the entire space used as the main listening area,
    or is the space used in fragments?

    bar area, seating, dining, "dance floor", etc?

  3. #3
    Senior Member pos's Avatar
    Join Date
    May 2007
    Location
    France
    Posts
    2,629

  4. #4
    Senior Member Lee in Montreal's Avatar
    Join Date
    Sep 2010
    Location
    Montréal
    Posts
    2,487
    Theriam, are you open to suggestions? I am asking because using a pair of 2242 as sub-only means you will be missing 80Hz-to-500Hz.

    Also, what will be the purpose of that system? If you mention SPL, I suppose it is for house parties...

    Here's what I would do (I suspect you will be building your own enclosures and are handy).

    Low bass ----- 2242-based Bertha subwoofer with Levan extensions (you need to build them)
    Bass ----- 2225/2226-based 4520 scoops (used scoops are dirt cheap)
    Low mid ----- 2225/2226-based 4560 (used enclosures are dirt cheap)
    Mid ----- 2246 on 2350 long throw horns (very cheap too)
    High ----- 2405 Ultra high frequencies

  5. #5
    Senior Member louped garouv's Avatar
    Join Date
    Jun 2004
    Location
    formerly "the city where imagination takes precedence over fact"
    Posts
    2,152
    "berthas" are dual 18s per cabinet, correct?

  6. #6
    Senior Member Lee in Montreal's Avatar
    Join Date
    Sep 2010
    Location
    Montréal
    Posts
    2,487
    Quote Originally Posted by louped garouv View Post
    "berthas" are dual 18s per cabinet, correct?
    Correct. And a modular design. The horn itself is an add-on. So moving them around is not that hard ;-)

    Name:  1248065648953_f.jpg
Views: 5388
Size:  35.8 KB
    Name:  discotwins17.jpg
Views: 5381
Size:  24.2 KB
    Name:  2s97z1x.jpg
Views: 8164
Size:  40.8 KB

    Bertha and Waldorf.
    Name:  Waldorf_Levan_4.jpg
Views: 11277
Size:  33.8 KB

    If making a big Bertha is not a possiblity, then I would built two Waldorfs with four 2242

    Also Theriam, if you don't already have purchased your 2242, may I suggest you purchase good used 2240s instead as they go lower by at least 5Hz and are dirt cheap. You can buy them for around $250 a pair on original JBL cones. Expect $500 for four drivers, which is less tha one single 2242... Build scoops with them and feel the thump. In each enclosure, one drivers can do 25Hz to 120Hz while the other does 25Hz to 50Hz. For really high SPL, then build four Waldorf/4520 (with eight 2240).

  7. #7
    Senior Member Eaulive's Avatar
    Join Date
    Aug 2009
    Location
    Back in Montreal
    Posts
    1,289
    Quote Originally Posted by Lee in Montreal View Post
    If making a big Bertha is not a possiblity, then I would built two Waldorfs with four 2242
    The Waldorf is a dual 18???
    My avatar: 4520 loaded with 2225H on E140 frames,
    1x 2202H on custom front loaded horn, 2x 2426 on 2370.

  8. #8
    Junior Member
    Join Date
    Jun 2010
    Location
    Cincinnati, OH
    Posts
    18
    Quote Originally Posted by Lee in Montreal View Post
    Correct. And a modular design. The horn itself is an add-on. So moving them around is not that hard ;-)

    Name:  1248065648953_f.jpg
Views: 5388
Size:  35.8 KB
    Name:  discotwins17.jpg
Views: 5381
Size:  24.2 KB
    Name:  2s97z1x.jpg
Views: 8164
Size:  40.8 KB

    Bertha and Waldorf.
    Name:  Waldorf_Levan_4.jpg
Views: 11277
Size:  33.8 KB

    If making a big Bertha is not a possiblity, then I would built two Waldorfs with four 2242

    Also Theriam, if you don't already have purchased your 2242, may I suggest you purchase good used 2240s instead as they go lower by at least 5Hz and are dirt cheap. You can buy them for around $250 a pair on original JBL cones. Expect $500 for four drivers, which is less tha one single 2242... Build scoops with them and feel the thump. In each enclosure, one drivers can do 25Hz to 120Hz while the other does 25Hz to 50Hz. For really high SPL, then build four Waldorf/4520 (with eight 2240).
    I like where we are going! I've always wanted to build a bass horn! Do we have access to good plans for the Bertha? Does anyone on the forum happen to have test data for both designs, Waldorf and Bertha, with JBL drivers?

  9. #9
    Junior Member
    Join Date
    Jun 2010
    Location
    Cincinnati, OH
    Posts
    18
    Quote Originally Posted by louped garouv View Post
    how many folks generally gather for these events?

    and is the entire space used as the main listening area,
    or is the space used in fragments?

    bar area, seating, dining, "dance floor", etc?
    We usually see between 100 to 200 people, depending on the event.

    Yes, the entire space would be the listening area and is wide open. The dance floor starts out as a 30 'x 30' area but takes over the entire floor late into the night!

  10. #10
    Senior Member pos's Avatar
    Join Date
    May 2007
    Location
    France
    Posts
    2,629
    Interesting info on bertha/levan horns:
    http://www.wavemusic.com/community/s...ead.php?t=2893

  11. #11
    Senior Member Lee in Montreal's Avatar
    Join Date
    Sep 2010
    Location
    Montréal
    Posts
    2,487
    And how that "barn" can be set-up

    http://www.systemsbyshorty.com/sbsstereo1.swf

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. Looking for High Efficiency Design
    By dubwicht in forum Lansing Product DIY Forum
    Replies: 12
    Last Post: 12-03-2006, 06:24 AM
  2. Looking for ideas for a hi-freq horn design
    By HipoFutura in forum Lansing Product DIY Forum
    Replies: 8
    Last Post: 07-28-2006, 03:12 PM
  3. Any ideas on this BTH driver design?
    By andywin in forum General Audio Discussion
    Replies: 0
    Last Post: 04-04-2005, 02:19 PM
  4. Need design ideas
    By Butch Adams in forum Lansing Product General Information
    Replies: 19
    Last Post: 03-30-2005, 10:44 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •