Hey Audiophile,
If you are going to use this in home system you shouldn´t count on a XO-frequency higher than 4-500Hz from the 4560/2225. So you will need a horn and driver that does this. 2"?
Brgds
Lars
Cutting straight along the red lines will change the horn. I would advice against it.
Johnny Haugen Sørgård
... I forgot... where I can find an adapter to connect the driver to the horn? In the original plan It should be in wood but for me Is diffucult to build. I have seen the adapter of old wood horn Fostex but I don't know where to find these metallic adapter!
Thanks for every help
Giuseppe
A 480Hz(like Yuichi flare) exponential adapter should be 1,4cm long. If the horn for example is Hypex=0,6, it should be 2,1cm. If making it that thick wood should be no problem.
What is recommended adapter thickness? THose I´ve seen seems shorter.
Still if you build that nice horn, what will you fill the gap between 4560/2225 and the horn with?
Brgds
Lars
My intention is to do a cut crossover frequency at 1200hz, I have a friend with instruments for calculating this. Probably we will modify the volume of the box, I want measure the sound before to finish to restore the boxes so I will be shure of the result.
About the adapter I will try to built by myself.
Giuseppe
There are currently 1 users browsing this thread. (0 members and 1 guests)