See attached for the 3 silver caps...
I don't want to replace these with Polypropylene or Mylar, I would like to use a stock-like replacement, no boutiques, etc.,
Any suggestions?
See attached for the 3 silver caps...
I don't want to replace these with Polypropylene or Mylar, I would like to use a stock-like replacement, no boutiques, etc.,
Any suggestions?
18uF is hard to find without some more searching. If it were me wanting to keep the electrolytics, I would start with this:
http://www.parts-express.com/pe/show...number=027-346
then add this:
http://www.parts-express.com/pe/show...number=027-320
in parallel to make 18uF. I can't really see the other values in your pic, but there are plenty of values available here:
http://www.parts-express.com/wizards...omo=&srchAttr=
Personally, I would consider changing to film types, at least for the smaller of the parallel pairs.
Mike Scott in SJ, CA
Drive 'em to the Xmax!
There are currently 1 users browsing this thread. (0 members and 1 guests)