Hi folks,
Is the 4333a selector switch for mono / bi-amping still available from JBL ?
Or can I buy a compatible part elsewhere ?
Thanks for your help,
Pascal
Hi folks,
Is the 4333a selector switch for mono / bi-amping still available from JBL ?
Or can I buy a compatible part elsewhere ?
Thanks for your help,
Pascal
Spirou38 JBL 4344MKII 4333A 4312MKII L80T L40 L20T Ti2000
I believe not too long ago someone here was sourcing a modern replacement for the 4-ways. Shouldn't be any different for a 3-way. Member "4313B" perhaps?
But remember, the switch is often to blame for problems and the suggestion is usually just to bi-amp them and bypass the switch altogether. From the "Designer's Post" under 4345 in the Forum's System Information heading; Greg Timbers wrote:There was the added complexity that the Marketing folks of that time required switchable bi-amp capabilities in which the incorrect setting of the switch was not allowed to hurt anything. These little things all add up to additional insertion loss for the woofer and loss of damping control.
". . . as you have no doubt noticed, no one told the 4345 that it can't work correctly so it does anyway."—Greg Timbers
Hi BMWCCA,
Are you thinking of that post http://www.audioheritage.org/vbullet...acement+4-ways where Giskard proposed schematics of new filters for 4333A without the rotary selector ... but I will need 2 filters : 1 for mono and one for bi-amping
Yes, I know , but I would like to keep my 4333A as close to the original as possible.
It's why I am looking for rotative selectors and that is not obvious
Pascal
Spirou38 JBL 4344MKII 4333A 4312MKII L80T L40 L20T Ti2000
No. Whoever it was was receiving such a switching device from Russia (?) maybe and was disappointed in the first prototype or version awaiting a second or had received one that was claimed to be superior to the OE version. At least that's what my near-60-year-old mind remembers. I'm no expert in this stuff so I might be thinking of a three-way switch or something else.
We are talking about this type of switch, right?: http://www.audioheritage.org/vbulletin/showthread.php?5209-4430-help!&p=47729&viewfull=1#post47729
Though Tom is no longer with us, this thread mentions a replacement:
http://www.audioheritage.org/vbullet...i-Amp-Question
Then there's this contribution from another departed member, if it's applicable:
http://www.audioheritage.org/vbulletin/showthread.php?5209-4430-help!&p=47729&viewfull=1#post47729
Good luck. Just trying to help.
". . . as you have no doubt noticed, no one told the 4345 that it can't work correctly so it does anyway."—Greg Timbers
There are currently 1 users browsing this thread. (0 members and 1 guests)