I have just upgraded my S&L speakertester to the woofer tester pro, so I am awaiting my license file. I should be up and running no later than Monday or Tuesday
Always fun learning more.......
I just finished hooking up a DBX 223 X-over to a Rotel RB1080 to run the SAM's and my MC602 on the LE14H-1's in Citation 7.4 cabs.
WOW!! pretty much plug and play!! X-over set at about 750-800hz 24 db per, everything set a 0db.
These are really smooth and blend with the 14's REALLY well.
Now lets remember that I have only had Ewaves with the Selenium drivers and LE14's for the bottom so that was my first horn system. They did do the intended purpose , which was to get people interested.
These are wonderfully smooth and detailed. And now I will give you a pic and then back to listening!!
Always fun learning more.......
It appears that you nailed it.
Here is what I got by taking one apart:
R1 20 ohm 10 watt
R2 20 ohm 10 watt
R3 12 ohm 25 watt
R4 13 ohm 25 watt
R5 1.5 ohm 5 watt
R6 1.8 ohm 5 watt
R7 2.4 ohm 5 watt
R8 0.75 ohm 5 watt
R9 39 ohm 10 watt
R10 39 ohm 10 watt
R11 1.8 ohm 5 watt
C1 47 uF 100V NPE
C2 0.01uF 100V MPT
C3 100 uF 100V NPE
C4 0.01uF 100V MPT
C5 6 uF 100V MPT
C6 12 uF 100V MPT
C7 5 uF 100V MPT
C8 2.5 uF 100V PMT
C9 2.2 uF 100V MPT
C10 1 uF 100V MPT
L1 0.5 mH 0.7 ohm DCR AC
L2 0.1 mH 0.4 ohm DCR AC
L3 1.9 mH 1.3 ohm DCR AC
L4 1.2 mH 0.8 ohm DCR AC
L5 0.08 mH 0.4 ohm DCR AC
L6 0.14 mH 0.7 ohm DCR ACD
Here is the schematic in LEAP. It has some similarities to the 1400 Array network.
I don't have any data files for the 435AL or 045TI.
Those look like Citation 7.4 subs in the photo. If they are you might want to check and see if there is an inductor in line with the LE14H-1's inside the enclosures.
I just ran a wire through the port at that time, but the inductor is bypassed now!
Thanks for the work on the XO 4313B!!
BTW they are also 14-3's now.
Always fun learning more.......
There are currently 1 users browsing this thread. (0 members and 1 guests)