I'm running a pair of Yamaha PC2002 amps bridged 700 wpc with my 250ti's.
Can I run this much power with my 240ti's safely without pushing them too hard?
Thanks, Bob
I'm running a pair of Yamaha PC2002 amps bridged 700 wpc with my 250ti's.
Can I run this much power with my 240ti's safely without pushing them too hard?
Thanks, Bob
The volume knob is what "pushes them too hard", not the amp's rating. That said I'd also suggest trying one amp in stereo mode as opposed to bridged, it might sound cleaner. Bridging usually sums noise and THD.
FWIW, I've run my L112s on 1000WPC and they didn't complain.
Guns can kill speakers too.
I'd add that I would also suggest trying the 250ti on one amp in stereo mode for comparison. Or, still use both amps but with only one channel driven each.
With most stereo amps, using only one channel gives you some of the benefits of bridging without the drawbacks. Power is increased substantially to the single channel. It depends on the amp's design and power supply. I'm suggesting you try different ways to get away from bridging at all.
There are currently 1 users browsing this thread. (0 members and 1 guests)