Results 1 to 7 of 7

Thread: Loking for a physically small 1" compression driver

  1. #1
    Member
    Join Date
    Aug 2009
    Location
    Mesa, AZ
    Posts
    36

    Loking for a physically small 1" compression driver

    I own a pair of 2426J but they are too large physically for my application. What is the smallest 1" exit compression driver JBL makes? I need usable range from about 1.25-20khz. Anything out there significantly smaller than the 2426? Maybe a neo driver?

  2. #2
    Senior Member edgewound's Avatar
    Join Date
    Jun 2005
    Location
    Southern California
    Posts
    2,776
    2408H/J is a screw-on 1" exit, 1.5" voice coil neo driver with mylar ring radiator diaphragm.

    It's pretty small.
    Edgewound...JBL Pro Authorized...since 1988
    Upland Loudspeaker Service, Upland, CA

  3. #3
    Member
    Join Date
    Aug 2009
    Location
    Mesa, AZ
    Posts
    36
    Everything that comes up in a Google search lists the 2408h as a 1.5" driver. Does the screw type make the exit smaller? I need to mate these with 1" bolt on lenses and I have male and female screw on adapters, but I think everything has to be 1".

  4. #4
    Senior Member edgewound's Avatar
    Join Date
    Jun 2005
    Location
    Southern California
    Posts
    2,776
    Take my word for it.

    It's a standard screw-on, 18 threads per inch, 1" exit driver. I promise.

    The voice coil is 1.5".
    Edgewound...JBL Pro Authorized...since 1988
    Upland Loudspeaker Service, Upland, CA

  5. #5
    Member
    Join Date
    Aug 2009
    Location
    Mesa, AZ
    Posts
    36
    Quote Originally Posted by edgewound View Post
    Take my word for it.

    It's a standard screw-on, 18 threads per inch, 1" exit driver. I promise.

    The voice coil is 1.5".
    Perfect, I just wanted to make sure I wasn't missing something. I'll look into them, thanks!

  6. #6
    Senior Member Eaulive's Avatar
    Join Date
    Aug 2009
    Location
    Back in Montreal
    Posts
    1,289
    Quote Originally Posted by edgewound View Post
    Take my word for it.

    It's a standard screw-on, 18 threads per inch, 1" exit driver. I promise.

    The voice coil is 1.5".
    I confirm

  7. #7
    Member
    Join Date
    Aug 2009
    Location
    Mesa, AZ
    Posts
    36
    Quote Originally Posted by Eaulive View Post
    I confirm
    Woo hoo! They don't appear to have been sold outside a cab, so I'm not finding much info on them. Any t/s parameters?

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. LE15B driver and L200 (Not L200L) -- Thiele / Small Parameters
    By TYO in forum Lansing Product Technical Help
    Replies: 2
    Last Post: 01-28-2011, 12:09 AM
  2. Replies: 21
    Last Post: 07-27-2010, 06:17 PM
  3. Source For Compression Driver "Foam"
    By toddalin in forum Lansing Product Technical Help
    Replies: 3
    Last Post: 01-26-2009, 04:18 PM
  4. Using 2 12" with a horn/compression driver
    By ecl86 in forum Lansing Product DIY Forum
    Replies: 30
    Last Post: 09-08-2007, 03:06 PM
  5. L96 monitor sound in "small" surround spk ?
    By tofkitaff in forum Lansing Product General Information
    Replies: 6
    Last Post: 08-04-2006, 12:29 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •