Results 1 to 10 of 10

Thread: 3144 schematic

  1. #1
    Senior Member
    Join Date
    Apr 2003
    Location
    Colorado
    Posts
    311

    3144 schematic ?

    JBL's site has 3143 and 3145 schematics, but no 3144.

    Anyone know where that might be available?

    It looks like 3144 was used with 2235H/2221H/2425J/2405 in the 4344
    Last edited by John Nebel; 06-12-2003 at 02:08 PM.

  2. #2
    Obsolete
    Join Date
    Apr 2003
    Location
    NLA
    Posts
    12,193

    Re: 3144 schematic ?

    Hello,

    The 3144 is the same as the 3145 and it was used in the 4344.
    2235H/2122H/2425J-2307-2308/2405.

  3. #3
    Senior Member
    Join Date
    Apr 2003
    Location
    Colorado
    Posts
    311
    Thanks Giskard. I'd also picked up on your answer to this on another thread a while back.

    Fixin to build two of these. The center-tapped inductors are in JBL's parts book and I ordered them, but haven't seen the goods yet.

    John

  4. #4
    Obsolete
    Join Date
    Apr 2003
    Location
    NLA
    Posts
    12,193
    Cool!

    Did you order them from the Pro Parts website or did you talk to a person?

    *****

    "Thanks Giskard. I'd also picked up on your answer to this on another thread a while back."

    For reference:

    http://www.audioheritage.org/vbullet...highlight=3144
    Last edited by 4313B; 09-08-2003 at 09:30 AM.

  5. #5
    Senior Member
    Join Date
    Apr 2003
    Location
    Colorado
    Posts
    311
    Giskard,

    From the web site. The part numbers appear to be

    61020-01R0 for 1.0mh

    61018-0R16 for .16mh

    ... gleaned from the 3155 schematic which has a more complete parts list.

    John

  6. #6
    Obsolete
    Join Date
    Apr 2003
    Location
    NLA
    Posts
    12,193
    Yeah those parts are for the 3155.

    The 3144 and 3145 parts are 41090 for the tapped 1.0 mH and 50344 for the tapped 0.16 mH.

    I really can't remember which were set to what, but I'm thinking one set was set to -6 dB and the other set was set to either -3 dB or -4 dB.

    Anyway, I'm sure it will all work out.

  7. #7
    Senior Member
    Join Date
    Apr 2003
    Location
    Colorado
    Posts
    311
    Thanks for those numbers. It looks like JBL messed up the order, so I have a chance to get the proper inductors if they have them.

    FWIW, the 3155 schematic is labeled -4db
    so the 3144 must be -6

  8. #8
    Obsolete
    Join Date
    Apr 2003
    Location
    NLA
    Posts
    12,193
    "Thanks for those numbers."

    You're welcome.

    "FWIW, the 3155 schematic is labeled -4db so the 3144 must be -6"

    That would be it then. I just couldn't remember off-hand and didn't think about it too hard

  9. #9
    Member
    Join Date
    May 2003
    Location
    Normandy
    Posts
    57

    Question .16mh 50344

    Originally posted by Giskard
    Yeah those parts are for the 3155.

    The 3144 and 3145 parts are 41090 for the tapped 1.0 mH and 50344 for the tapped 0.16 mH.

    I really can't remember which were set to what, but I'm thinking one set was set to -6 dB and the other set was set to either -3 dB or -4 dB.

    Anyway, I'm sure it will all work out.
    hi,
    i would like to know the dcr of this .16mh coil.
    regards.
    Phil

  10. #10
    Senior Member
    Join Date
    Apr 2003
    Location
    Australia
    Posts
    7,942
    If you can't obtain them I have used the alternative of split air core inductors successfully

    Ian

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. Everest schematic
    By Jan Daugaard in forum Lansing Product Technical Help
    Replies: 3
    Last Post: 06-28-2005, 10:53 AM
  2. JBL L 110 Crossover Schematic
    By vifa32144 in forum Lansing Product Technical Help
    Replies: 1
    Last Post: 07-12-2004, 08:04 PM
  3. L-300 Schematic question
    By Audiobeer in forum Lansing Product Technical Help
    Replies: 12
    Last Post: 06-22-2004, 10:05 AM
  4. 4612/ 4612A/ 4612OK crossover schematic?
    By GordonW in forum Lansing Product Technical Help
    Replies: 6
    Last Post: 03-09-2004, 07:59 PM
  5. Schematic for HK Award A300 tube integrated amp?
    By GordonW in forum Lansing Product Technical Help
    Replies: 2
    Last Post: 10-16-2003, 09:25 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •