Question for you JBL experts; What is the frequency handled by the LE10 in the L96? Where does it roll off?
Thanks.
Question for you JBL experts; What is the frequency handled by the LE10 in the L96? Where does it roll off?
Thanks.
Sansui 1000A, Sansui BA-F1, AU-D11II, TU-9900, AU-717, IB Sub, JBL L96,
7070, Boston A70, AU-9900, 717, 771, 881, B-2101
Does this help at all?
http://manuals.harman.com/JBL/HOM/Te...Delta%20ts.pdf
". . . as you have no doubt noticed, no one told the 4345 that it can't work correctly so it does anyway."—Greg Timbers
Aaah yes it does!! 1100 Hz...
Thank You!!
Sansui 1000A, Sansui BA-F1, AU-D11II, TU-9900, AU-717, IB Sub, JBL L96,
7070, Boston A70, AU-9900, 717, 771, 881, B-2101
Does anyone know of any people matching up the LE10H's with horns, and if so, what was the result?
Thanks.
Sansui 1000A, Sansui BA-F1, AU-D11II, TU-9900, AU-717, IB Sub, JBL L96,
7070, Boston A70, AU-9900, 717, 771, 881, B-2101
Try this, too: http://audioheritage.org/vbulletin/s...LE10H-1-LE111H
There are bound to be some Econowave references.
". . . as you have no doubt noticed, no one told the 4345 that it can't work correctly so it does anyway."—Greg Timbers
Surprisingly few measurements though. I have LE10A that are in the process of becoming a system with PT-95HF, still a work in progress. (Too cold to paint the baffles right now...)
I did have some plots saved in my RTA, but when I plugged it in just now it requested a software and firmware update, which wiped them out.
From memory, it makes it past 1KHz easily, perhaps 1.2K before rolling off.
Mike Scott in SJ, CA
Drive 'em to the Xmax!
If I remember right there was at least one long time member that used LE-10 with 2307/lense. No reason it won't work but you take a big efficiency hit on the horns. He seemed to like them just fine. I think he used a pair possible in an MTM config.Does anyone know of any people matching up the LE10H's with horns, and if so, what was the result?
Rob
"I could be arguing in my spare time"
There are currently 1 users browsing this thread. (0 members and 1 guests)