Page 5 of 5 FirstFirst ... 345
Results 61 to 67 of 67

Thread: h66000 h9900 h4365

  1. #61
    Senior Member pos's Avatar
    Join Date
    May 2007
    Location
    France
    Posts
    2,628
    Quote Originally Posted by 4313B View Post
    You'll notice that the H4338 is horizontal in the photo of the box above? Let's just say that Greg isn't impressed.
    Did he already turn his DD66000s on their side?

  2. #62
    Senior Member grumpy's Avatar
    Join Date
    Oct 2003
    Location
    SoCal
    Posts
    5,742
    What is an FMP file??
    I assume you discovered FMP = Frequency, Magnitude, Phase info in text format ...
    (basic info that can often be exchanged between speaker design/measurement programs)

  3. #63
    Senior Member Guido's Avatar
    Join Date
    Apr 2003
    Location
    Germany
    Posts
    2,503
    Quote Originally Posted by grumpy View Post
    I assume you discovered FMP = Frequency, Magnitude, Phase info in text format ...
    (basic info that can often be exchanged between speaker design/measurement programs)
    Thank you, I found out meanwhile.
    Currently lost into LEAP.
    .....will come back

    Merry Christmas

  4. #64
    Senior Member grumpy's Avatar
    Join Date
    Oct 2003
    Location
    SoCal
    Posts
    5,742
    Have fun while you're in there
    Merry Christmas.

  5. #65
    Senior Member Guido's Avatar
    Join Date
    Apr 2003
    Location
    Germany
    Posts
    2,503
    Thanks for this information about the GT active crossover.
    I'll have a look at it when I find the time.
    The last weeks I tried to refine the passive network in LEAP. I'm done at the moment and can't continue until I have the real thing here. Looks like a 99dB design and impedance is not lower than 3.6 ohms. The implementation of the 045Be isn't that problematic. The UHF will slightly roll off to 3 dB down between 20 kHz and 50 kHz. I'm not really worried about that

    I'm sure your 1500AL/476Be/H4338 design sound wonderful. I already have a 1x1500AL + 2435 + H4338 design since 3 years now, remember?

    This time the 2 woofer setup is a given as the EV2 cabinets are already in production.

  6. #66
    Senior Member Guido's Avatar
    Join Date
    Apr 2003
    Location
    Germany
    Posts
    2,503

    Giskard, let's continue here

    I want to refresh this thread as my EV2 cabinets will be here in september/october and I need to lift my a$$ now and build prototype networks to be refined in use with the actual speaker.

    Giskard, when converting the schematics from 1501AL to 1500AL, what DCR's did you use?
    E.g. the two 10mH subwoofer coils together are 1.3 ohms in the original network.

    The mod network use only one 10mH coil. 0.65 ohms? 1.3 ohms?
    Same for all othe coils.

    What do you think

  7. #67
    Senior Member
    Join Date
    Nov 2008
    Location
    Gothenburg, Sweden
    Posts
    761
    Quote Originally Posted by 4313B View Post
    A member asked for the raw data curves for the horn/driver combinations in the Everest II, K2-S9900 and 4365 so here they are.
    Interesting to see how "unperfect" the crossover slopes looks on these high-end systems.
    Is it a limitation in passive design?
    Or am I missing something?
    The cheapest 4365 looks the best to me here.

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •