Results 1 to 15 of 16

Thread: Any experience with Bryston 4B ST Amps

Hybrid View

Previous Post Previous Post   Next Post Next Post
  1. #1
    Senior Member jblbgw_man's Avatar
    Join Date
    Apr 2007
    Location
    Australia
    Posts
    133

    Any experience with Bryston 4B ST Amps

    Just interested in anybody's experiences with the Bryston 4B ST sonic quality, I was looking at using 1 for LF and the other to drive the HF sections on my 4435's .... all comments and opinions and/or experiences greatly appreciated ...... I guess I'm curious how it will go on the HF section .....
    4435, 4430, 4315, 4312B.
    2 x Bryston 4BSST2, BGW 203, JBL 5235, Aphex 720.

  2. #2
    Senior Member richluvsound's Avatar
    Join Date
    Dec 2006
    Location
    london england
    Posts
    2,060

    LF Yep !

    For a studio Bryston on the HF yep ! For home use no ..... too dry-for home , Class a or tubes

    If you can find a 3bst for the HF , i found it a lot warmer on my 4435's

    Rich

  3. #3
    Senior Member
    Join Date
    Apr 2003
    Location
    Australia
    Posts
    7,942
    Hence your quest for Paslabs.

    I have enyoyed the synergy of Passlabs and JBL for 10 years.

  4. #4
    Senior Member
    Join Date
    Apr 2003
    Location
    GTA, Ont.
    Posts
    5,109

    Older Bryston 2BLP ( Balanced )

    FWIW to the original question ( I also wouldn't use a 4B for HF ).

    Although I do use a Bryston 2BLP ( Pro ) balanced inputs .

    The balanced inputs are DC Biased ( don't ask ) with Polystyrene Film Foil caps creating a sloppy HiPass around 200 hz . FWIW, the standard amps topology, doesn't use any electrolytics of it's own in the front end .

    This CCed front end sounds way better than it has any right to .

    I figure its due to some bizarre form ( or implementation ) of ; a "Feed Forward Super Symmetry" that happens (due to the CCed caps ).

    Anyways, the sound is much richer than what I'm used to from older Byrstons .

    ( And it costs small potatoes to implement . )

    <> cheers

  5. #5
    Senior Member richluvsound's Avatar
    Join Date
    Dec 2006
    Location
    london england
    Posts
    2,060

    Next Week !

    Quote Originally Posted by Ian Mackenzie View Post
    Hence your quest for Paslabs.

    I have enyoyed the synergy of Passlabs and JBL for 10 years.


    Yep ... I'm almost there . I get the panels laser cut next week , assemble and cross my fingers as I plug it in ....

    DAC next project

    Rich

  6. #6
    Senior Member jblbgw_man's Avatar
    Join Date
    Apr 2007
    Location
    Australia
    Posts
    133
    Quote Originally Posted by richluvsound View Post
    Yep ... I'm almost there . I get the panels laser cut next week , assemble and cross my fingers as I plug it in ....

    DAC next project

    Rich
    Rich ... is the PASS Class A amp your building schematic and layout available to the general public and if so where ?
    4435, 4430, 4315, 4312B.
    2 x Bryston 4BSST2, BGW 203, JBL 5235, Aphex 720.

  7. #7
    Senior Member richluvsound's Avatar
    Join Date
    Dec 2006
    Location
    london england
    Posts
    2,060

    for you !

    Sorry Mods ... I duplicated this post ...... please delete this one if you see it .

    Cheers ,RuF
    Attached Images Attached Images

  8. #8
    Senior Member richluvsound's Avatar
    Join Date
    Dec 2006
    Location
    london england
    Posts
    2,060

    For you Mate !

    cus you aint getting the urn back

    http://www.diyaudio.com/forums/pass-labs/

    http://cgi.ebay.com/30W-Mosfet-class...item4aa01fdd75

    Guido has been brilliant and no way I could have done it with out his help ... Its been a steep learning curve .

    Ian is the other in house Pass Guru .

    Rich
    Attached Images Attached Images

  9. #9
    Senior Member jblbgw_man's Avatar
    Join Date
    Apr 2007
    Location
    Australia
    Posts
    133
    Quote Originally Posted by richluvsound View Post
    For a studio Bryston on the HF yep ! For home use no ..... too dry-for home , Class a or tubes

    If you can find a 3bst for the HF , i found it a lot warmer on my 4435's

    Rich
    Rich ... am I wrong but I would have thought the 3B ST and the 4B ST would have sounded the same, just one with more output power than the other, I don't have the schematics in front of me but usually when they have several models but with different output power ranges the topology is basically the same with the exception of extra output devices and larger transformer of course.... or am I missing something here?
    4435, 4430, 4315, 4312B.
    2 x Bryston 4BSST2, BGW 203, JBL 5235, Aphex 720.

  10. #10
    Senior Member richluvsound's Avatar
    Join Date
    Dec 2006
    Location
    london england
    Posts
    2,060

    I cant explain it

    In technical terms I cant explain it , but I know what I heard .

    Btw, my 4435's were not bi-amped at this point .

    Rich

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. Bryston ?
    By richluvsound in forum Professional Amps
    Replies: 11
    Last Post: 07-10-2009, 06:18 AM
  2. Bryston 10B
    By boputnam in forum Electronic Crossovers
    Replies: 41
    Last Post: 07-31-2006, 05:50 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •