+ Reply to Thread
Results 1 to 3 of 3

Thread: JBL 2206H drivers and 2402 Bullet tweeter

  1. #1
    Member
    Join Date
    Mar 2008
    Location
    UK
    Posts
    96

    JBL 2206H drivers and 2402 Bullet tweeter

    Just wanted an opinion on these units as Im considering building my own speakers.
    I think the crossover frequency is to high on the tweeter to be used with the driver?
    Or what would you suggest for a 3 way active system easch speaker in its own enclosure?
    Dave

  2. #2
    Senior Member richluvsound's Avatar
    Join Date
    Dec 2006
    Location
    london england
    Posts
    1,959

    Bass -mid

    Hi Dave ,

    2206 is not great for Low F , 45 htz ... 95 db ... Would work great with something below it . You could tune the box and use room gain to get some more at the bottom end . I would not use the 2402 in a 2-way . You could use a 2425 or another 1" and horn combo as a 2 way or add the 2402 for a 3-way.
    Try doing a search on Zilch, he has tried just about every combo in 2-ways .

    I think Scorpio uses the 2206 and so does Demon . Search their posts too !

    Good luck , Rich

  3. #3
    Senior Member 1audiohack's Avatar
    Join Date
    Jul 2007
    Location
    Las Vegas Nevada
    Posts
    1,486
    For home use I would use a 2425 or 2426 driving a 2342 or 2344 horn. And then a subwoofer or two.

    For PA same driver on a 2370 horn.
    If we knew what the hell we were doing, we wouldn't call it research would we.

+ Reply to Thread

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. help in adding bullet tweeter to horns
    By skudra in forum Lansing Product DIY Forum
    Replies: 5
    Last Post: 10-01-2009, 07:42 AM
  2. the 075 2402 bullet tweeter ? use ina 91db/w system
    By Timothy Bailey in forum Lansing Product DIY Forum
    Replies: 1
    Last Post: 06-28-2006, 04:25 AM
  3. 2402 "bullet" protection issue (please help)
    By DLutz in forum Lansing Product General Information
    Replies: 11
    Last Post: 01-18-2006, 03:03 PM
  4. Bullet tweeter
    By JohnK in forum Lansing Product General Information
    Replies: 16
    Last Post: 10-20-2005, 10:55 AM
  5. Bullet tweeter angles
    By Tom Loizeaux in forum Lansing Product Technical Help
    Replies: 3
    Last Post: 08-30-2005, 11:05 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts